Magnavox 26MF605W Series owner manual VCR, DVD PLAYER, or Other Devices With RCA Connectors

VCR, DVD PLAYER, OR OTHER DEVICES

WITH RCA CONNECTORS

T he AV IN jacks on the rear of the LCD TV enable quick connections of other

equipment. Connect a DVD player,VCR Video Game, Camcorder, etc., to these jacks.To view the material playing on the other equipment, set the LCD TV to its AV mode.

Disconnect all power sources before making any connections.

1Using an RCA-type Video and Audio cable (usually marked yellow, red, and white), connect the VCR’s Video and Audio Out jacks to the TV’s Video and Audio In jacks.

2Use SOURCE button on the remote control to select AV 1 (or AV2, AV3, S-Video1, or S-Video2 if you use the different jacks for this hookup) to watch VCR.

Note:

1.If your VCR equipped with a S-Video Out jack, uses S-Video connection for better picture detail and clarity. Use the S-Video cable to connect the VCR’s S-Video Out jacks to the TV’s S-Video In jacks.

2.You can also use the Video and Audio jacks in AV IN 2 and AV IN 3 located on the rear of the TV to connect your VCR or other Video Devices.

3.If your DVD Player is equipped with Component (Y, Pb, Pr) Output Jacks, please refer to “Connecting a DVD Player or other Video Equipments with Component Video Connectors” section for use of Component Video Connection for highest color and picture resolution in video playback.

1

AV Player with A/V connectors

MENU

		OK
2	SOURCE	PIP

CC

HELPFUL HINT

•The Audio jack of AV IN is shared between Video (CVBS) and S-Video signals. If Audio and Video is connected to Video (CVBS) input, you can still hear sound if you select S-Video via Source select, even there appears no image on screen.

•Select weak signal mode via the smart picture settings in case your VCR is showing a lot of noise or strange patterns during play mode.

11

MAG-26_eng 0104.indd 11

1/6/2005 10:30:39