Magnavox 26MF301B owner manual Volume Adjustment, Silence Mode, Switching Audio Mode

English

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal						Normal displays a 16:9 picture at its original size.
						4:3 displays a 16:9 picture at a 4:3 size; the picture is
						shortened horizontally. Sidebars appear on both edges
						of the screen.
						Movie expand displays a 16:9 picture that is
						vertically stretched to fill the screen.This only crops
Normal		4:3			Movie expand
						out the top of the picture.
						Zoom displays a 16:9 picture at its maximum size
						without changing its horizontal and vertical ratio.
						Wide displays a horizontally stretched picture.This
						crops out the left and right sides of the picture.
	Wide				Zoom
For 4:3 video signal						Normal displays a 4:3 picture at its original size.
						Sidebars appear on both edges of the screen.
						16:9 displays a 4:3 picture at a 16:9 size; the picture is
						stretched horizontally to fill the screen.
						Movie expand displays a 4:3 picture at a 16:9 size;
Normal		16:9			Movie expand	the picture is stretched more vertically at the top of
						the screen.This crops out the top of the picture.
						Zoom displays a 4:3 picture at a 16:9 size; at its
						maximum size that is more vertically stretched to fill
						the screen.This crops out the top and bottom of the
						picture.
	Wide				Zoom	Wide displays the picture with its center at the
						original size and the edges stretched horizontally to fill
						the screen.
For PC input signal through				Input mode		Normal displays a proportionately stretched picture.
			HDMI1
						Sidebars appear on both edges of the screen.

		Full displays a picture that is stretched out of
		proportion horizontally to fill the screen.
		Dot by dot displays a picture in its original size.
Normal	Full	Dot by dot

13

INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES

Sound Functions

describe how to change the audio or the audio language as well as the volume.

	Volume Adjustment
	Use VOL +/− to adjust the volume.
Silence Mode		Volume 30
	will be displayed for a few seconds when adjusting the volume.

Press MUTE to turn off the sound temporarily.

Mute	hi!		hola!
will be displayed for a few seconds.		salut!
• Press MUTE again or VOL +/− to recover the original volume.

USEFUL TIPS INFORMATION

Switching Audio Mode

ATSC

Press SAP repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast.

•[Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

11.1

English 1/3

NTSC

Press SAP to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

11

SAP / STEREO

e.g.) When all audio are available

SAP / STEREO SAP / MONO SAP / STEREO

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio