Control Panel
*
5
6
7
− VOLUME + MENU − CHANNEL +POWER
4 | 3 | 2 | 1 |
Terminals
*
8
9
10
11
1 |
| POWER | ➠ p.11 |
| |||
| |||
| Press to turn the unit on and go into standby mode. | ||
| To completely turn off the unit, you must unplug the AC | ||
| power cord. |
| |
2 | CHANNEL + / − | ➠ p.12 | |
| Press to select channels or move up (+) / down (−) | ||
| through the main menu items. |
| |
3 | MENU | ➠ p.15 | |
4 | VOLUME + / − | ➠ p.13 | |
| Press to adjust the volume up /down or move right |
(+) / left (−) through the main menu items.
5Standby indicator
Lights up red when the unit goes to standby mode.
6Power on indicator
Lights up green when power is on.
7Infrared sensor window
Receives infrared rays transmitted from the remote control.
*This indicator does not function on this unit.
Side Panel |
| |
8 | HDMI 2 Input jack | ➠ p.10, 24 |
9 | ||
| Input jacks for VIDEO | ➠ p.24, 25 |
Rear Panel |
| |
10 | Cable management | ➠ p.9 |
11 | AC power cord | ➠ p.10 |
12 | Antenna Input jack | ➠ p.10 |
13 | HDMI 3 Input jack | ➠ p.10, 24 |
14HDMI 1
HDMI connection for HDMI or DVI device.When you connect your PC that has a DVI terminal, you can enjoy this unit as a PC monitor.
9
INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS CONNECTING DEVICES USEFUL
12 | 15 | Component Video and Audio (L/R) Input jacks | |
|
|
| ➠ p.10, 24 |
13 | 16 | Digital Audio Output jack | ➠ p.25 |
14 | 17 | Analog Audio (L/R) Output jacks | |
15 |
|
| ➠ p.25 |
16 | 18 | Analog Audio (L/R) Input jacks for HDMI 1 | |
17 |
| Input jack | ➠ p.24, 25 |
18 |
| Audio cable connection from a DVI device. | |
|
| When you connect your PC that has a DVI terminal, use | |
|
| a stereo mini plug conversion cable as well. | |
|
| (For HDMI 1 Input jack only) |
|
TIPS INFORMATION
Note for service terminal
* service terminal (service use only)
• Use this terminal only when a software update is necessary.
• User should not connect any devices to the service terminal such as digital camera, keyboard, mouse, etc. (because these will not work).
• The software update is, in most cases, handled by an authorized service person or in some circumstances the user may be asked to do the software update themselves.
Cable Management
Keep the cables through this holder to avoid tangling them.