Magnavox 19MF338B Connect to a cable, Connect to a Direct Broadcast Satellite DBS, EN-9

Connect to a cable

When your TV is connected to the cable socket, you may receive free digital and high definition programming (depending on your cable provider). Digital and high definition cable channels can be recognized by the format of the channel number.The channel number includes a dot “.” For example, 11.1, 46.30, 108.201. Contact your cable provider for more information.

Connect to a Direct Broadcast Satellite (DBS)

SATELLITE

•A/V (Composite Video and Audio)

•S-Video and Audio

•YPbPr (Component Video Input)

•HDMI

Connect a cable receiver box/satellite set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 and 4, or the channel specified by the service provider.

Connect a cable receiver box/satellite set-top box through component video input or HDMI

CABLE

OROR

ESPAÑOL FRANÇAISE ENGLISH

There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV. The set-top box contains a digital TV tuner for receiving off-air digital television broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a cable receiver box/satellite set- top box

ANTENNA SATELLITE CABLE

OROR

Cable Receiver Box

A cable receiver box or satellite set-top box can be connected to the TV through the following connections:

•ANTENNA (75ohm)

Cable Receiver Box

EN-9