Magnavox 27MT3305/17 warranty Basic Antenna and Cable Connections

Page 5

1

BASIC ANTENNA AND CABLE CONNECTIONS

Your home’s signal input might come from a single (75 ohm) round cable, a

Converter Box, or from an antenna. In either case the connection to the TV is very easy.

If your Cable TV signal or

1Antenna signal is a round cable

(75 ohm) then you're ready to con- nect to the TV.

If your antenna has flat twin-

lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.

If you have a Cable Converter

Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.

Connect the Cable TV cable or

2Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.

If you have a Cable Converter

Box: Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.

Antenna Connection

Combination

VHF/UHF Antenna

(Outdoor or Indoor)

300 to 75Ω	Back of TV
Adapter

Twin Lead

Wire

Round Cable

75Ω

Direct Cable Connection

Cable signal coming from Cable Company

HELPFUL HINT

After using the AutoProgram Control, press the CH + and – buttons to scroll through all the channels stored in the television’s memory.

Back of TV

75Ω Round

Coaxial Cable

Jack Panel Back of TV

Image 5

Contents Model No Serial No 27MT3305/17Subject Panel No Panel Layout Panel IndexDear Magnavox product owner Warranty Owner Model Verification Confirmation RegistrationAs per NEC National Electric Code Example of Antenna GroundingBasic Antenna and Cable Connections Cable Box w/RF In/Outputs Cable BOX ConnectionsConnect the Cable Company Cable Box w/Audio/Video OutputsPress the Volume + button to Basic TV and Remote Control OperationPress the Channel UP + or Down button to select TV channelsConnect the Video yellow AV AUDIO/VIDEO Input ConnectionCable to the Video AV In jack on the back of the TV Cable to the Video OUT jack on the back of the VCRConnect one end of the S Video S-VHS Input ConnectionsConnect other end of the S Turn the VCR and the TV on Press the CH + or CHConnect one end of the Right AV AUDIO/VIDEO Output ConnectionsTurn the TV and audio system Connect one end of the yellowRemote Control Button Descriptions Power button HOW to USE the Language Control Press the Menu button on Remote to show the on-screen HOW to USE the Tuner Mode ControlMenu Press the Cursor UP ˚ or Press Cursor UP˚ orAutomatically Program When finished, press the STARemote to show the on-screen menu Press Cursor UP ˚ orHelpful Hints Channel EditBrightness Control Picture Menu ControlsSound Menu Controls AVL Auto Volume Leveler PressTreble Press the Cursor Right ˙or Left ˝ buttons Bass Press the Cursor Right ˙or Left ˝ buttons1remote to display the on-screen menu 43 Expand Format ControlMenu options Autolock or Format Press the Cursor Down ¸Movie Ratings Understanding Autolock ControlsAccess Code Using the Numbered buttons Setting UP AN Access CodePress the Cursor UP ˚or Press the Cursor UP ˚or Press the Cursor RIGHT˙Block Channels Press the Cursor UP ˚ or Down ¸ buttons to select BLOCK/CLEAR ALL Channels AT the Same TimeEither Clear ALL or Block ALL If Clear ALL is selected, press the Cursor Right ˙ butPress the Cursor UP 3 or Movie RatingsUse the Cursor Right ˙ Button on the remote to turn the rating option on or OFFButton on the remote to turn the option on or OFF TV RatingsRemote When highlighted, each feature canBlocking Options Closed Captioning Remote to display the current Closed Caption settingPress the CC button on Press the CC button repeatedlyPress the Sleep button repeat SleeptimerPress the Sleep button on Press the Smart Picture Button repeatedly to select either SmartpicturePress the Smart Picture Ton repeatedly to toggle between SmartsoundPress the Smart Sound but Troubleshooting Product that requires modification or Magnavox Limited WarrantyContact Magnavox Customer Care Center at French SpeakingPage Page