Sony STR-D550Z manual 20EN, Numeric button Operates, To reset the setting to the factory setting

Page 20

Advanced Remote Operations

Operating One Component While Using Another (background operation)

You can temporality operate other components while listening to or watching a program.

Changing the Factory Setting of a FUNCTION Button

If the factory settings of the FUNCTION buttons (page

10)don’t match your system components, you can change them. For example, if you connect a Sony LD player to the VIDEO 2 jacks, you can assign the VIDEO 2 button to set the remote to control the LD player.

Note that the settings of the TUNER and PHONO buttons cannot be changed.

Numeric buttons

BACKGROUND ￿

0 ) = +

1

Hold down BACKGROUND.

2

Press both the corresponding numeric button of

 

the component you’re going to use (see the table

 

below) and one of the following buttons at the

Numeric buttons

￿

0 ) = +

SYSTEM CONTROL/ FUNCTION

same time; VISUAL POWER, TV/VIDEO, CH

PRESET +/–, ANT TV/VTR, D.SKIP, (, 9, p,

0/), =/+, P, r.

Example: To start recording on a tape deck while

listening to a CD

While holding down BACKGROUND,

press 4 (or 5) and press r + ( at the

same time.

The numeric buttons are assigned to select the functions as follows:

Numeric button

Operates

 

 

1

CD player

 

 

2

DAT deck

 

 

3

MD deck

 

 

4

Tape deck A

 

 

5

Tape deck B

 

 

6

LD player

 

 

7

VCR (remote control mode VTR 1*)

 

 

8

VCR (remote control mode VTR 2*)

 

 

9

VCR (remote control mode VTR 3*)

 

 

0

TV

 

 

*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to VHS, Beta and 8mm respectively.

1Holding down the SYSTEM CONTROL/ FUNCTION button whose function you want to change (VIDEO 2, for example).

2Press the corresponding numeric button of the component you want to assign to the SYSTEM CONTROL/FUNCTION button (6 - LD player, for example).

For the numeric buttons, see the table in “Operating One Component While Using Another.”

Now you can use the VIDEO 2 button to control your Sony LD player.

To reset the setting to the factory setting

Repeat the above procedure.

20EN

Page 19 Page 21
Image 20
Page 19 Page 21
Contents FM Stereo FM-AM Receiver Precautions Table of Contents When to replace batteries UnpackingHookup Overview Inserting batteries into the remoteConnecting a ground wire Antenna HookupsAudio Component Hookups OverviewSpeaker System Hookups Control A1 Hookups USA and Canadian STR-DE705 onlySelecting the speaker system TV/VCR HookupsSelecting the impedance STR-DE705 and STR-D650Z only Before You Use Your Receiver Connecting the AC power cordAC Hookups Watching video programs Using the remoteSelecting a Component Receiving Broadcasts 11EN Presetting Radio StationsReceiving broadcasts by scanning stations automatic tuning Tuning preset stations preset tuning Indexing preset stationsScanning indexed stations index tuning IndexingRecording 13ENIndexing program sources Recording on an audio tape or MiniDiscUsing the Sleep Timer 14ENRecording on a video tape You can freely specify the timeUsing Pre-programmed Sound Fields 15ENTo play without surround effects To turn off the sound fieldsTaking Advantage of the Sound Fields 16ENHow can you customize the sound fields? Sound Fields for STR-D550Z SelectAdjusting the tone parameter Adjusting surround sound parametersResetting customized sound fields to the factory settings Customizing Sound FieldsSelecting the center mode 18ENRemote RM-P362/RM-U262 For STR-D550ZAdjusting the speaker volume Adjusting the delay timeAdjusting the tone 19ENNumeric button Operates To reset the setting to the factory setting20EN Clearing the programmed signal Programming the Remote21EN For STR-DE705/STR-D650Z and Canadian STR-DE605 onlyTroubleshooting 22ENSpecifications Glossary 24ENTest tone A system without a center speaker Phantom mode25EN 26EN Rear Panel DescriptionsRemote Button Descriptions Remote Operates Function Button28EN Receiving Preset Scanning Preset StationsStations Scanning Radio StationsPrécautions Au sujet de ce manuelPréparatifs Fonctionnement de l’ampli-tunerUtilisation des champs sonores Fonctions élaborées pour le contrôle à distanceMise en place des piles dans la télécommande DéballageDescription des raccordements Avant de commencerRaccordement d’antennes Raccordement de composants audioAperçu Raccordement du fil de terreRaccordement d’enceintes Raccordement d’un téléviseur/ magnétoscope Sélection du système d’enceintesBranchement du cordon d’alimentation secteur Avant la mise en service de l’ampli-tunerRaccordement au courant secteur Pour regarder des programmes vidéo Utilisation de la télécommandeSélection d’un composant 10F Si vous utilisez un téléviseur SonySi vous voulez changer le réglage usine d’un bouton Si le composant ne se met pas sous tensionRecherche d’une station par balayage accord automatique Préréglage des stations de radio11F Indexation 12FAccord des stations préréglées accord préréglé Indexation des stations prérégléesEnregistrement 13FBalayage des stations indexées accord d’index Indexation des sources de programmeProgrammation de l’arrêt automatique 14FEnregistrement sur une cassette vidéo Vous pouvez écouter le son en cours d’enregistrementUtilisation des champs sonores préréglés 15FPour mieux profiter des champs sonores 16FComment personnaliser les champs sonores? Champs sonores pour le STR-D550Z Sélectionnez PourTone ON/OFF DPC Mode Indicateur SUR Personnalisation des champs sonores17F Réglage des timbresSélection du mode de canal central Télécommande RM-P362/RM-U26218F Pour le STR-D550ZRéglage du volume des enceintes 19FRéglage du temps de retard Si vous avez Sélectionnez Pour queTouche numérique Pour sélectionner Pour revenir aux réglages usineTélécommande STR-DE705/STR Effacement d’un signal programméPour programmer un signal d’enregistrement Programmation de laGuide de dépannage Spécifications 23FGlossaire 24FDans un système sans enceinte centrale mode Phantom 25FEvolution du son des enceintes arrière Tonalité d’essai26F Nomenclature du panneau arrièreNomenclature de la télécommande Commande Contrôle FonctionCommande Contrôle Fonction28F W, X, Y, ZNomenclature TouchesCommandes 29FPrises IndicateursRéception radio 30FExemple 1 Lecture d’un CD Affichage32F
Related manuals
Manual 58 pages 27.89 Kb

STR-DE705, STR-DE605, STR-D550Z, STR-D650Z specifications

The Sony STR-D650Z, STR-D550Z, STR-DE605, and STR-DE705 are part of Sony's distinguished line of home theater receivers, offering enthusiasts an impressive audio experience. Each model is crafted with a focus on delivering high-quality sound, catering to both casual listeners and dedicated audiophiles.

The STR-D650Z delivers powerful audio performance with a 5.1 channel configuration, supporting up to 100 watts per channel. It features Dolby Pro Logic II technology, enhancing surround sound performance. The inclusion of multiple inputs, including optical and coaxial digital inputs, allows users to connect various audio and video sources seamlessly. The D650Z also boasts advanced tone controls and a high-quality phono preamp for vinyl enthusiasts.

In contrast, the STR-D550Z maintains a solid 5.1 channel output but simplifies connectivity options while still offering remarkable sound quality. Users can expect dynamic sound reproduction thanks to the model's robust amplifier design. Its onboard DSP allows for customization of listening modes, adapting the audio output to the content being played, whether it be movies, music, or gaming.

The STR-DE605 stands out with its enhanced DTS and Dolby Digital decoding, providing immersive audio experiences for home theaters. This model is optimized for multi-channel soundtracks, producing a rich, enveloping audio environment. The DE605 also includes an easy-to-use interface with various preset sound modes that cater to different genres and sources, ensuring that users can enjoy their media exactly how they want it.

Lastly, the STR-DE705 elevates the home theater experience further with its 7.1 channel configuration, ensuring compatibility with modern audio formats. This receiver incorporates the Sony Digital Cinema Sound technology that fine-tunes audio based on room acoustics and speaker placement. The STR-DE705 is equipped with built-in HDMI ports, allowing for direct connection to high-definition video sources while delivering pristine audio quality.

In summary, the Sony STR-D650Z, STR-D550Z, STR-DE605, and STR-DE705 offer a range of exceptional features and technologies designed to create an immersive audio environment. With their robust power outputs, modern decoding capabilities, and user-friendly interfaces, these receivers make an excellent choice for anyone looking to elevate their home entertainment experience. Whether for music, movies, or gaming, Sony’s home theater receivers promise to deliver outstanding sound that resonates with enthusiasts around the world.
Top Page Image Contents