About Installing Your Display Safely | Cisco Systems OL-17986-01

Chapter 1 Important Safety and Compliance Information

About Installing Your Display Safely

Cisco LCD Professional Series displays are not designed to stand freely on the floor. They must be installed correctly in an appropriate mount, bracket, stand, rack, or cabinet.

Warning Dropping this equipment, handling it roughly, or allowing it to fall might damage it or cause personal injury.

•Ensure that at least two persons lift and move the display.

•When putting the display down, be sure to put it down softly.

•Never place the display face-down on the floor.

•When installing the display in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. Use a cabinet or rack of a size appropriate to the product.

•If the display will be mounted to a wall, ensure that a qualified contractor installs the wall mount, and make sure that the wall mount is designed specifically for a display like yours.

•Some installation sites have attributes that can cause serious damage to your display. Contact Cisco or a Cisco-authorized Digital Media Systems partner before installing your display in any physical location where it will be exposed to heavy dust, high or low temperatures, high humidity, or chemical substances, or anywhere that it will operate continuously for more than 20 hours at a time, such as an airport, a train station, or a similar setting.

About Cleaning Your Display Safely

•Cleaning the LCD Display Surface, Case, and Housing Safely, page 1-4

•Cleaning the Power Plug and the Electrical Outlet Safely, page 1-5

Cleaning the LCD Display Surface, Case, and Housing Safely

Disconnect the power cord and use the soft cotton flannel cleaning cloth that shipped with your LCD display. Moisten the cloth slightly with LCD panel cleanser or use water. If you must use a cleanser that is not formulated specifically for use with LCD display panels, dilute it with water at a ratio of 1:10.

•Wipe the display case.

•Wipe the surface of the TFT-LCD screen.

•To prevent product discoloration, structural distortion, erasure of printing, and peeling of the screen surface, never spray any cleanser directly onto any surface of your display. In particular, avoid using any cleanser formulation that contains wax, acetone, benzene, alcohol, paint thinner, or any other flammable or corrosive substance.

•Because the display housing is easily scratched, use the specified cloth only. As your LCD display may be scratched if there is any foreign material on the cloth, shake the cloth thoroughly before using it.

User Guide for Cisco LCD Professional Series Displays

1-4	OL-17986-01