Cisco Systems OL-17986-01 manual Procedure

Chapter 4 Adjusting Display Settings

Using the Setup Menu

Procedure

Step 1 From the main menu, choose Setup > Safety Screen.

Step 2 To highlight the name of the method by which you will prevent burn-in, use the Up and Down buttons. You can choose any of these methods:

•Pixel Shift — Shifts all pixels horizontally or vertically, or both, at an interval that you define. Configurable values for this method are:

–Horizontal Dot — Counts the number of pixels by which horizontal pixel shift should occur, in the range from 0 to 4 pixels.

–Vertical Line — Counts the number of pixels by which vertical pixel shift should occur, in the range from 0 to 4 pixels.

– Time — Sets the interval between pixel shifts, as counted in minutes.

•Timer — Sets a timer for screen burn protection. Configurable values for this method are:

–Timer — Choose whether this operation should run continuously or if it should stop when it is finished.

–Mode — Choose whether to activate the settings you defined for Scroll mode, Bar mode, or Eraser mode.

–Period — Sets the interval for each mode set in the timer.

–Time — Specify the duration. For Scroll mode, choose in the range from 1 to 5 seconds. For Bar mode or Eraser mode, choose in the range from 10 to 50 seconds.

•Scroll — Moves all pixels according to a pattern. This method is useful when images are already burned in to the display.

• Bar — Prevents burn-in by moving long, black and white, vertical lines.

•Eraser — Prevents burn-in by moving a rectangular pattern.

Step 3 To turn the highlighted method On or Off, use the Up and Down buttons.

Step 4 To save your selections and implement them, push Enter.

Related Topics

•Locking Front Panel Controls and the Remote Control, page 2-7

•Turning the Video Wall Feature On or Off from the Video Wall Menu, page 4-16

	User Guide for Cisco LCD Professional Series Displays
4-20	OL-17986-01