Cisco Systems OL-17986-01 manual

Page 2

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:

Turn the television or radio antenna until the interference stops.

Move the equipment to one side or the other of the television or radio.

Move the equipment farther away from the television or radio.

Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

CCDE, CCSI, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0903R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

User Guide for Cisco LCD Professional Series Displays © 2008 Cisco Systems, Inc. All rights reserved.

Image 2
Contents User Guide for Cisco LCD Professional Series Displays Americas HeadquartersPage N T E N T S Basics Editing the 4-digit PIN from the Safety Lock PIN Menu OL-17986-01 Important Safety and Compliance Information About Electrical and Fire DangersAlways Never About Choosing the Proper Installation Site Consideration DetailsCleaning the LCD Display Surface, Case, and Housing Safely About Installing Your Display SafelyAbout Cleaning Your Display Safely Regulatory Compliance Notes and Notices Cleaning the Power Plug and the Electrical Outlet SafelyAbout Batteries United States FCC Class a NoticeUser Information Canada JapanEurope and its Member Nations Taiwan-BSMI Class a NoticeRepublic of Korea European Notice Italy-Homologation Notice Classifications Video In / RS 232 / Video OutTransport and Storage Limitations SymbolsRussia-GOST-R Quality Certificate Знак Ростеста PCT OL-17986-01 Package Contents BasicsGetting to Know Your Cisco LCD Professional Series Display About Controls and Sensors on the Front of Your LCD Display About Terminals on the Back of Your Display Back-All Display SizesUsing the Kensington Slot ProcedureAbout the Remote Control SRS TS XTLocking Front Panel Controls and the Remote Control Related TopicsMechanical Layout LCD Professional Series 100 40 Display LCD-100-Pro-40NLCD Display Head for 40 Display Mechanical Layout LCD Professional Series 110 52 Display LCD-110-Pro-52SInstalling Vesa Brackets LCD Display Head for 52 Display40 Vesa Bracket Dimensions Connecting to Other Devices Connecting to an Audio Amplifier Connecting to a Digital A/V Source HdmiConnecting to a Digital A/V Source DVI to Hdmi OL-17986-01 Opening and Closing the Main Menu Before You BeginUsing the Input Menu Choosing a Video Input Source from the Source List MenuUsing the Picture Menu Working in the Edit Name MenuPersonalizing Picture Settings with the Custom Menu Choosing a Color Tone Definition from the Color Tone MenuRelated Topics Choosing a Picture Setting from the Mode Menu Choosing an Aspect Ratio or a Zoom Level from the Size Menu Turning Film Mode On or Off from the Film Mode Menu Using the Sound Menu Personalizing Audio Settings from the Custom Menu Turning Equalization On or Off from the Auto Volume Menu Turning Multichannel Audio On or Off from the SRS TS XT MenuUsing the Setup Menu Choosing a Menu System Language from the Language MenuAdjusting Clock-based Settings from the Time Menu Editing the 4-digit PIN from the Safety Lock PIN Menu Related Topics Configuring Video Wall Options and Settings Before You Begin From the main menu, choose Setup Video Wall Horizontal From the main menu, choose Setup Video Wall Screen Divider Procedure Setting the Delay Interval from the Power On Adjustment Menu Restore Factory Default Color Settings from the Reset MenuWorking in the S/N Menu