Fostex D2424LV Installing the removable case in the recorder, Connecting a detachable controller

Page 8

Model D2424LV Quick Operation Guide

• Installing the removable case in the recorder

1. Install the caddy (containing a hard disk inside) into the slot.

Push in the case with the correct side facing toward you. (Use both hands to push it in so that the surface of the case and the front panel become flush.)

2. Use the coin to lock the caddy.

Caddy

Coin etc.

<CAUTION>

Do not forget to lock the caddy installed into the slot.

When locking or unlocking the caddy with the coin, make sure that the recorder's power is off.

• Connecting a detachable controller

1. Attach a detachable controller (included) to the hooks on the front panel.

2. Securely insert the controller’s connector cable to the connector on the front panel.

Instead of using the controller, you may use an optional extension cable (Model 8551B). Consult your dealer for more information.

Model 8551B Optional extension cable

Consult the dealer you purchased the recorder from or our sales office about information on the extension cable.

8

Image 8

Contents Quick Operation Guide Model D2424LV Quick Operation Guide Safety Instructions Contents Package contents Recording mediaDisassembling the caddy Installing a hard disk in the caddyPreparation for the current drive Assembling the case Connecting cablesFixing the hard disk to the case Installing the removable case in the recorder Connecting a detachable controllerPress the EXECUTE/YES key Turn the power onSampling frequency Format type Program Time BaseSetup of the Internal Clock Press the Setup key while in the stop modeConnecting a analog mixer Analog mixerConnecting a digital mixer Digital mixerHints Initial settingsAbout Sampling Frequency Adjusting the recording level Basic recordingBasic analog recording Stopping recordingTo cancel the undo operation, press the UNDO/ Redo key again Undo and redo recording single undo/redoBasic digital recording Selecting DigitalSelecting Digital Out About Digital In selectionPress the EXIT/NO key or Stop button to exit the Setup mode Setting the reference clockAbout reference clock setting Multitrack recording using overdubbing Ping-pong recordingPress the Record button once PlaybackMixdown Basic Locate functionLocating the top of the Program Locating the end of the recorded area of the ProgramRecording in a new Program Selecting the desired ProgramCurrent drive formatting by 16bit Changing the program FSCurrent drive formatting by 24bit Playback using theVari-pitch function Vari-pitch function proceduresSet the desired pitch data using the Jog dial Press the Recall key, then press the Vari Pitch keyReference manual reference pages Declaration of EC Directive Memo Fostex Corporation