Fostex VR800 owner manual When SURE? appears, press the EXECUTE/YES key

Page 9

VR800 Quick Operation Guide

3 When [SURE?] appears, press the EXECUTE/YES key.

The VR800 displays [Pls Wait !] (Please Wait !) briefly, and then show the menu for Record mode selection. Initially, [ADAC 8ch] for Record mode appears. [SURE ?] flashes at the same time.

DIGITAL

SYNC OUT

AUTO

DRIVE

SCSI

A.PUNCH

DIGITAL44.1kHz

SETUP

SURE ?

SYNC OUT

 

DRIVE

 

 

SCSI

 

 

 

AUTO

 

A.PUNCH

4 Use the JOG dial to select the desired record mode.

Turn the JOG dial to select the desired record mode from [ADAC 8ch] mode, [Master 8ch] mode, and [Master 4ch] mode. Select the appropriate mode for the type of the drive (media) used. Refer to the following chart for more information on the

record mode for specific media.

DIGITAL44.1kHz

SETUP

SURE ?

SYNC OUT

 

DRIVE

 

 

SCSI

 

 

 

AUTO

 

A.PUNCH

DIGITAL

44.1kHz

DIGITAL

44.1kHz

 

SETUP

 

SETUP

SURE ?

 

 

 

 

 

 

SURE ?

 

 

SYNC OUT

 

DRIVE

 

 

 

 

 

SYNC OUT

 

DRIVE

 

 

 

SCSI

 

 

 

 

SCSI

 

 

 

 

 

 

 

 

 

 

AUTO

 

A.PUNCH

 

 

 

 

 

AUTO

 

A.PUNCH

 

<Record mode>

There are three recording modes available for the current drive.

Record mode

[ADAC 8ch] mode

[Master 8ch] mode

[Master 4ch] mode

Quantumize

A. D. A. C. (*)

16 bit linear

16 bit linear

Sampling Frequency

44.1kHz

44.1kHz

44.1kHz

Recording time

Approx. 67 minutes

Approx. 17 minutes

Approx. 17 minutes

Compatible media

MO disk, zip disk, Fixed disk

Fixed disk

MO disk, zip disk, Fixed disk

3.5-inch E-IDE hard disk

3.5-inch E-IDE hard disk

3.5-inch E-IDE hard disk

 

 

 

 

 

 

Simultaneous 8 track recording by adat digital

Simultaneous 8 track recording by adat digital

Simultaneous 4 track recording by adat digital

 

input is possible. RECORD TRACK select

input is possible.

input is possible. (ch1~ch4)

Recording function

keys 1-8 are enabled.

RECORD TRACK select keys 1-8 are enabled.

RECORD TRACK select keys 1-4 are enabled.

<NOTE>

 

<NOTE>

 

 

 

Simultaneous recording by MO disk is a

 

Simultaneous recording by MO disk is a

 

maximum two tracks.

 

maximum two tracks.

 

 

 

 

 

Save/load is possible only with external SCSI

Save/load is possible with external SCSI drive,

Save/load is possible only with external SCSI

Save/load function

drives. Save/load is not possible with DAT and

DAT or adat.

drives or DAT. Save/load is not possible with

 

adat.

 

adat.

 

 

 

 

*A. D. A. C. is the next generation digital audio coding technique maximized for multitrack recording, which has been developed by joint research of Matsushita Electric Industry Corporation and Fostex Corporation.

<Notes>

*Available recording time varies depending on the disk capacity and type. For actual available time for a particular disk, please refer to the “List of the drives with guaranteed operation” in the Owner’s Manual.

*To cancel the formatting operation, press the EXIT/NO key before proceeding to step 5. Each press of the EXIT/NO key will return you to the previous display, and finally exit setup mode.

*Use only the above [ADAC 8ch] mode, or [Master 4ch] mode to format removable type disks. Even if it has been formatted by the [Master 8ch] mode, sufficient recordable area cannot be obtained.

9

Image 9
Contents Quick Operation Guide ModelSafety Instructions Table of Contents Recording media Using an E-IDE hard diskInstall the included brackets on the hard disk Installing an E-IDE hard disk in the VR800Replacescrews. the bottom panel using the same six Place the VR800 on the flat level surface soConnecting a Scsi drive to the VR800 Using a Scsi driveScsi ID number setting Turn on the power to the connected Scsi drive and the VR800 Formatting initializing a diskInsert a disk in the Scsi drive Use the JOG dial to select the desired record mode When SURE? appears, press the EXECUTE/YES keyIDE will light For details, refer to Press the EXIT/NO key to quit the setup modePress the Setup key to change to Setup mode Checking the record mode of the formatted diskChecking available recording time on a formatted disk Formatting the disk againBefore turning off the power to the VR800 Ejecting a removable disk from the Scsi drivePress and hold down the Shift key and press the EXIT/NO key Scsi drive is the current drive Connecting a digital mixer equipped with adat I/O Connecting a mixerAbout changing the digital-in clock setting Connecting an analog mixing consoleInitial settings Basic recordingAbout sampling frequency Basic recording procedure MixerPress the Record button once. The Record button lamp Undo and redo recording To cancel the undo operation, press the UNDO/REDO key againPress the Stop button to finish recording Press the Play buttonWhen you finish overdubbing, stop the VR800, locate Multitrack recording using overdubbingPing-pong recording Press the Record button onceRecording in a new program MixdownSelecting the desired program from multiple programs Basic Locate functionLocating the top of the program Locating the end of the recorded area of the programProcedures vari pitch function Playback using the Vari-pitch functionKey To turn off vari pitch mode, press the Vari Pitch keyReference pages Fostex Corporation
Related manuals
Manual 122 pages 2.66 Kb