FR-2 Field Memory Recorder
About this manual
This manual covers all about how to use the Fostex
Its explanations assume that you have basic knowledge and experience of professional digital recording.
To understand the
Chapter 2 ("Before using the
Precautions
•When supplying the power to the unit from the AC power outlet, only use the Fostex Model
If you use any other AC adaptor, the unit may not work correctly and there is a serious risk of damage to the unit.
•Make sure that the voltage of your AC power outlet matches the voltage requirements printed on the AC adaptor.
If you wish to use the unit in a country where the voltage of the AC power outlet does not match your AC adaptor, ask your local Fostex dealer or service station for purchasing an appropriate AC adaptor.
Note that the AC adaptor can be used both in 50 Hz and 60 Hz areas.
•When operating the unit on batteries, use alkaline,
•When removing batteries or disconnecting the AC adaptor, make sure that the unit [POWER] switch is set to "OFF".
Removing batteries or disconnecting the AC adaptor while the power is "ON" may damage data because the unit always transfers data between the current card and memory.
•While the unit is accessing a memory card (for example, during recording), never turn off the power. Make sure that the unit completely stops accessing the card before you turn off the power. Otherwise, recorded data may be lost, as well as the memory card may be damaged.
Note that Fostex assumes no responsibility on data loss or whatsoever due to use of the unit.
•Fostex is not responsible for any "direct damage" or "indirect damage" caused by using the unit.
7