Fostex FR-2 owner manual Moves the volume label cursor right and left

Page 78

FR-2Field Memory Recorder (Chapter 6: MENU mode/Disk menu)

4)Move the character selection cursor to "OK" and press the [ENTER] key.

The display shows "Please Wait!" while the FR-2 is executing the operation for storing the entered label. When the operation is completed, "Completed!" is shown on the screen and the display returns to show the Home screen.

You can enter up to 11 characters. If you enter more than 11 characters, the FR-2 auto- matically deletes characters after the 12th.

<Note>: If you are going to enter an illegal name, "Illegal!" is shown on the display and the operation is cancelled.

When a USB keyboard is connected to the FR-2, you can carry out the following operation.

	Character keys		You can directly enter a character instead of selecting from among the character
	Character keys		options on the screen. Each time you press a character key, the volume label

			cursor moves right.

	/	keys	Acts the same as the [MENU] dial on the FR-2 panel.

	/	keys	Moves the volume label cursor right and left.

	Back space key		Deletes the character at the volume label cursor position, and moves all the sub-
	Back space key		sequent characters left.
			sequent characters left.

	Insert key		Turn ON and OFF the INSERT mode. When it is ON, the volume label cursor is lit
	Insert key		solid. When it is OFF, the file name cursor is flashing.
			solid. When it is OFF, the file name cursor is flashing.

	Delete key		Deletes the character at the volume label cursor position.

	Enter key		Used to fix the label entered.
	Enter key		Acts the same as moving the character selection cursor to "OK" and pressing the
			[ENTER] key on the FR-2 panel.

78

Image 78

Contents

Field Memory Recorder Model FR-2 Page Safety Instructions Table of contents PC/Keyboard connection Setting cue pointsAudio input/output connection About recording system Recording analog audioConnecting the FR-2 to a PC Menu mode outline Cue menuSetup menu Physical dimensionsAbout this manual Precautions on installation Manual organization Menu mode Specifications Manual conventionsExporting audio files to a PC Memo Product overview Overview What is in the box FR-2 Carring beltMemo Please read this chapter before using Table of contentsAbout power supply Operating on batteriesInserting batteries Fit the compartment cover as it was before Reducing the battery power consumptionInsert eight AA-type batteries Ni-HMConnecting the AC adaptor Turning on the powerOperating the FR-2 on the AC adaptor About power supply voltage Turning the backlight on or off Setting the display backlight/contrastAdjusting the display contrast Press the Enter key to fix the contrast valueSetting the realtime clock About memory card Inserting/removing a memory cardInserting a card When loading a used FAT32 formatted cardWhen loading a card which is not FAT32 formatted Insert a memory card to card slotWhile YES is highlighted, press the Enter key Removing a card While the recorder is stopped, press the Card Release keyUse the Menu dial to select YES and press the Enter key Not Mounted Initial format of a memory card Volume labelDefault volume label examples ATA PCM000 CFC CFC000 While the warning message is shown, press the Enter keyMemo Names and functions Details about screensPhones jack HOME/HOLD Reset keyMenu mode SP/HP Monitor controlMENU/ENTER knob Access indicatorPeak indicators REC Stby Record Standby keyTop panel Light Contrast keyCard Release key PRE REC switch FS kHz switchQuantization switch Track Mode switchTrim controls LINE/MIC switchesHPF switches Transport keys Play keyLeft side panel Right side panelBottom panel When no memory card is set Details about screensHome screen Menu mode screens When a virgin memory card is setWhen a recorded memory card is set FR-2Field Memory Recorder Names and functions FR-2Field Memory Recorder Names and functions Audio input/output connection PC/keyboard connectionAudio input/output connection Analog audio inputsDigital audio input Analog audio outputsDigital audio output Connecting the FR-2 to a PC Connecting the FR-2 to a USB keyboardPC/keyboard Connection Recording/playback Skip/locate functionsAbout recording system Recording time in stereo Recording time in monoSelecting the input source Adjusting the input gainRecording analog audio High-pass FilterLimiter Selecting the sampling frequency/quantization bit lengthSelecting the track mode Adjusting the recording levelScreen example during input monitor Level controls Monitoring recording signals Checking the remain for recordingMaking recording To stop recording, press the REC Stby keyRecording with PRE REC active About overloadingQuantization switch Recording digital audioSetting cue points Setting a cue point on-the-flyAbout default cue name About cue point information Viewing cue point informationDeleting a cue point in real-time 00/08Playback Playback in the CUE mode Cueing playbackSelecting using the CUE / keys Normal audio playbackSkip/locate functions Memo Menu mode Menu mode outline Menu Description Menu itemsCue menu Locating to a cue point LocateRenaming a cue point Rename Use the Menu dial to select Rename and press the Enter keyPress the Home key to exit the Menu mode Enter the desired cue nameEditing time data of a cue point Edit Use the Menu dial to select Edit and press the Enter keyDeleting a cue point Delete Use the Menu dial to select Delete and press the Enter keyUse the Menu dial to select File and press the Enter key File menuSelecting an audio file to be played back Select Use the Menu dial to select Select and press the Enter keyRenaming an audio file Rename Enter the desired file nameDeleting an audio file Delete Character keysPress the Enter key to delete the file Audio file protection on/off Protect Use the Menu dial to select Protect and press the Enter keyRestoring an audio file Restore Use the Menu dial to select Restore and press the Enter key Use the Menu dial to select Disk and press the Enter key Disk menu Selecting the current drive Select OffOptimizing a memory card Optimize Press the Enter keyFormatting a memory card Format Use the Menu dial to select Format and press the Enter keyEditing a volume label of a memory card Volume Label Enter the desired volume labelMoves the volume label cursor right and left Viewing information of a memory card Disk Info To dismiss the information, press the Enter keySetup menu Date Selecting default file name type File Name ModeUse the Menu dial to select Setup and press the Enter key TakeSetting the default file name Default File Name Select Take No. and press the Enter key Selecting Take numberRenaming the scene name Select Rename and press the Enter keyEnabling the selected scene name Resetting the scene name to the initial nameSelect Reset and press the Enter key Select Select and press the Enter keyAdjusting the real time clock Adjust Real Time Use the Menu dial to enter the desired time dataUnplugged Speaker mute function on/off Speaker MuteAfter entering a desired time value, press the Enter key PluggedSetting error tone output condition Error Tone When selecting Input ClipWhen selecting Batt Warning When selecting Disk Remain Press the Home key to exit the Menu mode 44.1kHz/48kHz Selecting the remain display mode Remain Display22.05kHz 88.2kHz/96kHzSetting the digital output signal format Digi Out Type DIFSelecting the battery type Battery Selecting the USB keyboard type Keyboard Viewing the ROM version Version Initializing settings of the Setup menu Init Setup To executing initializing, press the Enter keyFR-2Field Memory Recorder Menu mode/Setup menu Exporting audio files to a PC Connecting the FR-2 to a PC Display shows the first layer of the Menu mode screen Exporting audio data to a computer application example 100101 Click on Convert -, followed by Done see arrow 5 below102 Main specifications Digital IN/OUT 176.4 kHz and 192 kHz FS are not supported USB for PC connectionUSB for USB keyboard connection Power supply DimensionsWeight Quantization and Sampling Frequency106 Declaration of EC Directive Affect of Immunity on This EquipmentMemo Page Fostex CO