Setting the default file name (Default File Name)
This menu item sets the default scene name and take number used for a file name. The "Default scene name" setting is effective when the "File Name Mode" described above is set to "Scene".
The following description is assumed that the
1)Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the Setup menu.
2)Use the [MENU] dial to select "Default Scene Name" and press the [ENTER] key.
The display now shows the scene name list for selecting a desired scene name. The scene name list has 17 pages.
You can select a desired option from among "Scene01" through "Scene99".
3)Use the [MENU] dial to select a desired scene name and press the [ENTER] key.
The display now shows the setting items for the selected scene name.
For example, if you select "01: Scene01", the screen looks like the one shown right below.
The function of each parameter is as below.
Take No. | Selects the take number (001 through 999). |
|
|
Select | Enables the selected scene name. |
|
|
Reset | Sets the selected scene name to the default name (such as "Scene01"). |
|
|
Rename | Renames the scene name to a new one. |
|
|
The following procedure shows how to select scene name 01 (Scene01), set the desired scene name and Take number, and enable the setting.
82