Connecting the Wireless for Hdmi

How to Connect the Wireless for HDMI - Multi-Room Solution

1.Connect a Hi-Def source to the Sender unit using the included HDMI cable.

2.Connect an HD display or projector to the Receiver unit using the included HDMI cable.

NOTE: The Wireless for HDMI - Multi-Room Solution does not support DVI devices.

3. Connect the included 5V DC power supplies to the Sender and Receiver unit and connect them to available electrical outlets.

4.OPTIONAL: Connect the included IR emitter to the Sender unit and place it near the IR sensor of a source device* to be controlled.

To control the IR source connected to the Sender unit, point the source’s IR remote at the IR sensor on the Receiver unit.

5. The Link and Video LED indicators on both the Sender and Receiver unit will glow bright blue to indicate a successful connection between the Sender and Receiver unit. Ordinarily, no pairing is required out of the box. However, the Sender and Receiver can also be paired manually if needed.

Wiring Diagram for the Wireless for HDMI - Multi-Room Solution

HDMI CABLE

Receiver

Sender

GTV-WHD-1080P-LR

*Please see www.gefentv.com for a list of compatible brands and models.