INTRODUCTION
Congratulations on your purchase of the GefenTV Wireless for HDMI. Your complete satis- faction is very important to us.
About Gefen
We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line. Please visit http://www.gefen.com for the latest offerings in High-Definition signal solutions or call us between the hours of 8:00 am and 5:00 pm Monday-Friday, Pacific Standard Time for assistance with your A/V needs. We’ll be happy to assist you.
The GefenTV Wireless for HDMI Multi-Room Solution
The GefenTV Wireless for HDMI - Multi-Room Solution sends high definition audio and video to any HDTV display up to 100 feet (30 meters) away. It extends HDMI from computers, set-top boxes, Blu-ray players, and other audio/video sources to a remote HDTV display. The Wireless for HDMI - Multi-Room Solution supports resolutions up to 1080p Full HD along with support for up to 7.1-channels of digital audio in PCM, and up to 5.1 channels in Dolby® and DTS® formats. The included IR emitter can be connected to the Sender unit and placed by the Hi-Def source*, allowing full control of the source
from another room simply by pointing the IR remote at the Receiver unit. The Wireless for HDMI - Multi-Room Solution transmits through walls and does not require line-of-sight for good reception. Additional features allow multiple units using the included handheld remote control.
How It Works
Connect one of the included HDMI cables from the Hi-Def source to the Sender unit. Connect the other included HDMI cable from the Receiver unit to the HDTV display. Connect the included power supplies to the Sender and Receiver units and to available electrical outlets. Connect the included IR Emitter to the Sender unit and place it near the IR sensor window of the device to be controlled*. Power-up the source and the display. Within approximately one minute, the “Video” indicators on both units should now glow solid blue to indicate a successful connection between the Sender and Receiver unit. If the Sender and Receiver units do not pair automatically, the LEDs on the Sender will continue to blink. Navigate through the on-screen menu and have the Receiver unit look for a Sender unit. If the remote is not available, you can press and hold the recessed pairing button on the Receiver with a paper clip until its Link LED stops blinking and goes dark. Press and hold its recessed pairing button on the Sender unit with a paper clip until the Link LED stops blinking and goes dark. If navigating the menu using the remote, press the OK button on the IR remote. A message indicating that the Sender and the Receiver units have been paired will appear on the display. Point the source’s IR remote at the IR window on the Receiver unit to control the source that is placed near the Sender unit.
*Please see www.gefentv.com for a list of compatible brands and models.
