Gefen EXT-HDMI1.3-1410-BLK user manual Connecting and Operating the 110 Splitter for Hdmi

Page 9

CONNECTING AND OPERATING THE 1:10 SPLITTER FOR HDMI 1.3

How to Connect the 1:10 Splitter For HDMI 1.3

1.Connect the HDMI or DVI (with a DVI to HDMI adapter or cable) source device to the 1:10 Splitter For HDMI 1.3 HDMI input port using the supplied HDMI cable.

2.Connect up to ten HDMI or DVI (with a HDMI to DVI adapter or cable) displays to the 1:10 Splitter For HDMI 1.3 output ports using user supplied HDMI cables.

3.Connect the included 5V DC power adapter to the 1:10 Splitter For HDMI 1.3 power input port.

4.Power on the displays first and then the source.

Wiring Diagram for the Gefen 1:10 Splitter for HDMI 1.3

HDMI CABLE

HDMI Source

HDMI Splitter

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

HDMI Display

EXT-HDMI1.3-1410-SIL

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Splitter for Hdmi Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Gefen IntroductionGefen 110 Splitter For Hdmi How It WorksOperation Notes Features Hdmi 1.3 Features Features Front Panel Back Panel Panel LayoutPanel Descriptions Reset ButtonConnecting and Operating the 110 Splitter for Hdmi How to Connect the 110 Splitter For HdmiWiring Diagram for the Gefen 110 Splitter for Hdmi Edid Management Edid Mode SelectionTiming Refresh Rate Audio Format Supported ChannelsFollowing Edid features are copied from Output External Edid ManagementDisplay Connections Specifications Product Registration WarrantyPage Rev A2 Nordhoff St., Chatsworth CA
Top Page Image Contents