PANEL DESCRIPTIONS
1Reset Button
This button will cycle power on the 1:10 Splitter For HDMI 1.3. If the EDID mode has been changed it will not take effect until the unit has been reset.
2Activity Indicator
This LED indicator will turn bright blue when an input signal is detected.
3Power Indicator
This LED indicator will become active once the included 5V DC power adapter has been properly connected.
4EDID Selection Switch
Switches between the
5HDMI Input Port
Connect an HDMI or DVI (with a DVI to HDMI adaptor or cable) source device to this input port.
6HDMI Output Ports 1 - 10
Connect up to 10 HDMI or DVI (with a HDMI to DVI adapter or cable) displays to these output ports. The display connected to the port labeled OUT 1 will have its EDID used when the external mode is active.
724V DC Power Input
Connect the included 24V DC power supply to this port.
5