Raymarine D7637-1 manual To Register a handset, To de-register a handset, Factory Reset

To Register a handset

In the DEALER menu, at REGISTRATION, press PILOT.

If the S100 is not registered, the display will read NOT REGISTERED. Press > to start the registration process, you can press < at any time to stop the search.

HANDSET NOT
REGISTERED	REG >

REGISTER

START >

SEARCHING

< CANCEL

When the S1000 is found by the	D7657-1
SmartController and registration is
complete, the display will read REGISTERED

Note: For successful registration, ensure that all other handheld units on your boat are turned off. If you try to register a new handset with others ac- tive, you will see a REGISTRATION INCOMPLETE message.

To de-register a handset

In the DEALER menu, at REGISTRATION, press PILOT.

REGISTERED

DE-REG >

D7674-1

If the S100 is already registered, then

the display will read REGISTERED. Press > to continue, or STANDBY to cancel the operation.

The S100 will attempt to communicate with the S1000 and de-register. When complete, the display will read NOT REGISTERED.

If the S100 cannot communicate with the S1000 then a BASE NOT FOUND message will be displayed. It is still possible to de-register the S100 at this point by pressing >. To leave without de-registering, press STANDBY.

Factory Reset

This option will clear all settings from the S100 and the S1000. Press and hold the PILOT key for 2 seconds to activate the reset.

Note: A reset does not alter the registration status of the S100

User Guide 29