Dealer Maintenance Procedures

This section includes procedures that have a significant impact on autopilot operation and can affect your boat’s safety. You will not need to follow these procedures in normal operation. We therefore recommend that these are only performed by authorized service personnel.

Accessing the dealer calibration area.

From STANDBY mode, press and hold STANDBY for 2 seconds to enter PILOT SETUP. Then press and hold mode for 5 seconds until the dealer calibration screen is displayed.

Subsequent presses of mode will cycle through the calibration options.

Hardware and Software version numbers

Use this screen to display the version and serial numbers for the unit.

Contrast

Use the < and > keys to adjust the contrast to a satisfactory level.

Self test

Press PILOT to start the unit test sequence and then follow the on-screen instructions. This will test the display, buzzer and button functions.

Diagnostics

Press PILOT to display the status of the wireless link.

Handset Registration

Raymarine wireless systems demand that each wireless controller is “registered” to a basestation, in this case a S1000. This registration process is to prevent unauthorized control of your boat by another user nearby. Your S1000 system is supplied with the handset pre-registered to the S1000.

There may be instances where you want to move your controller to another boat and use it with another system. In this case, you will need to de-register from the current system and register with the new system. You can do this using the REGISTRATION function.

28

Raymarine S1000 Autopilot

 

 

Page 32
Image 32
Raymarine D7637-1 manual Dealer Maintenance Procedures