NOTE:ASSEMBLY
Ensure the sweeper is switched off and the battery is removed before attaching or removing the sweeper tubes. The inner tube must be assembled to the housing before use.
• TUBE ASSEMBLY:To attach the inner tube to the sweeper, line up the tube with the sweeper housing as shown in figure D.
Push the tube into the sweeper housing until the lock button |
SWITCHINGWARNING:O A D OFF (FIGURE F) USE BOTH
HANDS TO GRIP THE PRODUCT FIRMLY WHEN SWITCHING ON.
To switch the sweeper on, slide the on/off switch forward .
To switch the sweeper off, slide the on/off switch back.
CAUTION:
SELF OR BYSTANDERS.
F |
engages the lock hole in the tube. Repeat this process for the | ||
outer tube. | OPERATION |
|
| E | |
safetyCAUTION:glasses. Wear a filterAlwaysmask ifwearthe | ||
operation is dusty. Use of gloves, long |
| |
pants and substantial footwear is |
| |
recommended. Keep long hair and loose |
| |
clothing away from openings and moving |
| |
parts. THIS SWEEPER IS FOR |
| |
HOUSEHOLD USE ONLY. |
| |
• Hold the sweeper with one hand as |
| |
shown in figure E and sweep from side to |
| |
side with the nozzle several inches above |
| |
the ground. Slowly advance keeping the |
| |
accumulated pile of debris in front of you. |
| |
|
| 7 |
MAINTENANCE
CLEANINGCAUTION:AND ST RAGE
ON THE UNIT. DO NOT POUR OR SPRAY WATER Use only mild soap and a damp cloth to clean the unit. Never let any liquid get inside the unit; never immerse any part of the unit into a liquid.
Your sweeper should be stored in a dry place. Do not store the unit on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion of the metal parts.