Fault finding
All Raymarine products are designed to provide many years of
If a fault occurs with your S1000, use the fault finding tables in this section to help identify the problem and provide a solution. If you cannot resolve the problem yourself, refer to the product support information.
SYMPTOM | POSSIBLE CAUSE and SOLUTION |
|
|
Display is blank | No power – press standby to power up the S100 |
| or change the batteries. |
|
|
Autopilot not responding. | Drive the boat for 30 seconds at above 2.5kts and |
| retry. |
| Check autopilot connections. |
| Check GPS is switched on and connected. |
|
|
Boat turns slowly and takes a | Rudder gain too low. Increase gain setting. |
long time to come onto course |
|
|
|
Boat overshoots when turning | Rudder gain too high. Decrease gain setting. |
onto a new course |
|
|
|
Position information not | Navigator not transmitting the correct position |
received | data. |
|
|
The pilot will not auto advance | No bearing to waypoint information received from |
to the next waypoint. | the navigator. |
|
|
Instruments powered from | Check connections |
SeaTalk will not power up | Check fuses |
|
|
User Guide | 25 |
|
|
