Raymarine D7637-1 manual General maintenance, Routine checks, Cleaning the S1000 and S100

Q. What should I do when the safety alarm sounds?

The safety alarm will sound when the pilot switches to STANDBY as a safety precaution.You MUST take the helm.

The safety alarm will sound when the pilot is in control of your boat, and:

•the S1000 loses contact with all of its connected controllers or

•when the S1000 stops receiving valid GPS information.

General maintenance

Routine checks

The S1000 computer and S100 controller do NOT contain user-serviceable parts. If you remove the main cover you will invalidate the warranty. It should be serviced only by authorized Raymarine service technician.

As a result, user maintenance is limited to the following checks

•make sure all cable connectors are firmly attached and free of corrosion

•examine for signs of wear or damage – replace any damaged cables

•replace batteries when necessary

Cleaning the S1000 and S100

Take care when cleaning the display. Avoid wiping the display screen with a dry cloth as this could scratch the screen coating. If necessary, only use a mild detergent.

Never use chemical or abrasive materials to clean the computer or controller. If it is dirty, wipe it with a clean, damp cloth.

User Guide 27