3
Connect the coaxial cable from the antenna/CATV wall jack directly to the Super 10+TEL DBS coaxial jack labelled "ANT/CATV IN". If you are also connecting a satellite dish, connect the coaxial cable from the satellite dish to the Super 10+TEL DBS coaxial jack labelled "SAT IN".
If you are connecting a satellite receiver, connect two coaxial cables from the receiver to both of the Super 10+TEL DBS coaxial jacks labelled "OUT", corresponding to the dish and wall jack inputs.
If you ARE NOT connecting a satellite dish (as illustrated below), connect a coaxial cable from the device to be protected (VCR/TV) directly to the coaxial jack labelled "ANT/CATV OUT".
SUPER 10+TEL DBS TYPICAL CONNECTION DIAGRAM
(protecting satellite receiver, TV, VCR and stereo)
SAT ANT/CATV
IN OUT IN OUT
SPECIFICATIONS
| Super 10+TEL | Super 10+TEL Deluxe | Super 10+TEL DBS |
Surge Energy Absorption (joules): | 2300 | 2800 | 2100 |
Surge Current (NM/CM): | 42.5/54.5 ka | 49/54.5 ka | 42.5/54.5 ka |
Telephone Line Protection*: | two line | two line | one line |
Coaxial Protection**: | - | - | two signal lines |
*2 female "RJ" jacks; 260V peak +/- 10% (clamping voltage);<1 picosecond (response time); 6Kv, 10 microseconds (peak transient input voltage); 2 pair (wires 2, 3, 4, 5) protected
**4 female "F" coaxial connectors; 24,000 amps (peak pulse power dissipation); 240 joules energy absorption; Less than .5 dB insertion loss
ALL MODELS
<35 volts | |
UL 1449 (1998 rev.): | 330 volts |
Response Time (Normal Mode): | Instantaneous (0 ns), |
| except Super 10+TEL DBS: <1 ns. |
Protection Modes: | Line to Neutral, Line to Ground, and Neutral to Ground |
EMI/RFI Line Noise Filtering: | >80 dB @ 1 MHz |
AC Outlets: | 10 NEMA |
AC Line Cord: | 10 ft., 14 gauge, 3 conductor grounded |
Dimensions (HxWxD, in.): | 2 x 3½ x 10¾ |
Agency Approvals: | UL 1449 TVSS, UL 1363, UL 479A, UL 1283, cUL |
Canadian National
Standards
Certified by UL
