Epson DX-TL4E manual Unplug the Power Cord During a Long Absence

Page 3

Caution and care

HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR)

NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT

Touching the inside of the cabinet or inserting foreign objects of any kind through or ventilation holes not only creates a safety hazard but can also cause extensive damage.

PROTECT THE POWER CORD

Damage to the power cord may cause fire or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by holding the main plug.

If this unit is moved with the power on status, the built-in HDD may be damaged. Confirm that more than one minute have passed since the power cord and the connecting cords were disconnected, then move this unit.

UNPLUG THE POWER CORD DURING A LONG ABSENCE

Turn off the power and unplug the power cord during a long absence.

MAINTAIN GOOD VENTILATION

Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.

WHEN NOT IN USE

When not in use, always turn OFF the MAIN switch.

CABINET CARE

Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or leads should not be left in contact with the cabinet surface for long periods.

INSTALLATION LOCATION

For excellent performance and lasting reliability install in a location that is:-

1.Well ventilated, out of direct sunlight and away from direct heat.

2.A solid vibration-free surface.

3.Free from high humidity, excessive dust and away from magnetic fields.

4.Please ensure that the ventilation fan located on the unit’s back panel is not blocked.

UNSUITABLE LOCATIONS

Placing the unit in the following places might shorten the product life:

•Extremely cold places, such as refrigerated warehouses and ice houses

•Places where excessive hydrogen sulfide is likely to be generated, such as hot-springs areas

•Places or locations with salt air environment.

THIS EQUIPMENT DOES NOT PROVIDE CONNECTION FOR USED WITH OUTDOOR OR CABLE DISTRIBUTION SYSTEMS.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT PLACE HEAVY OBJECT ON THIS UNIT.

DO NOT STEP ONTO THIS UNIT.

The unit may drop or fall by losing its balance. It may cause injury or failure of the unit.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. THIS APPARATUS MUST BE GROUNDED.

MAINS LEAD CONNECTION

The mains lead on this Unit is fitted with a non-rewireable mains plug, incorporating a 5A fuse. If you need to replace the fuse, use a 5A fuse approved by BSI or ASTA to BS 1362, ensuring you refit the fuse cover. If the mains plug is not suitable for the sockets in your home, and you require to remove the plug, remove the fuse, cut off the plug then dispose of the plug immediately, to avoid a possible electric shock hazard. To refit a new plug, follow these instructions; Green- and-yellow: Earth, Blue: Neutral and Brown: Live. As the colours in the mains lead of this Unit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

•The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.

•The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

•The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

This unit complies with the requirements of the EC Directive 2004/108/EC, “EMC Directive” and 2006/95/EC, “Low Voltage Directive”. The requirements for the susceptibility according to EN 50130-4 and the requirements for interference according to EN 55022 are observed for the operation on residential areas, business, light industrial premises and in small scale enterprises, inside as well as outside of the building. All places of operation are characterised by their connection to the public low voltage power supply system. This unit is manufactured in accordance with EN 60950-1.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Page Unplug the Power Cord During a Long Absence Recordable time and product warranty Disclaimer Page Table of Contents Clip Copy Load Default Setup OSD On-Screen Display Setup Main Monitoring Setup ScreenPTZ Mode Digital Zoom Mode Load / Save Setup Clear All DataList of Illustrations Alarm In Event Action Alarm Out setup screen User’s Manual Introduction FeaturesTechnical Overview Package Contents Required Installation ToolsConnecting the Video Source Connecting the Loop Through Video Connecting AudioSetting Unit for Cvbs or VGA output Connecting the Monitor Connecting AlarmsConnecting the Spot Monitor Connecting to the Network Port AI 1 to 4 AlarmAlarm Out Factory Reset Connecting to the RS-232C PortConnecting the Power Cord Connecting to the USB PortFront Panel Controls ConfigurationPanic Button Infrared Remote Control Connecting the Infrared Remote ControlTurning on the Power Initial Unit SetupSetup Screen Four-Channel Digital Video Recorder System Information Normal Setup ScreenSystem Information Change screen Date/Time setup screen Holiday Setup screen User’s Manual System Check Config. screen System Check Alarm Out / Notify screen M.A.R.T. Setup screen System Log screen Camera Setup Screen Configuring Input DevicesPTZ Device list Motion Detector setup screen Text-In setup screen Text-In Generic Text setup screen Alarm Out setup screen Alarm Out Schedule screen RS232 setup screen Record Mode Setup Screen Configuring Recording SettingsTime-Lapse Record Setup screen Time-Lapse Recording Schedule screen Pre-Event Record Setup screen Alarm In Event Action Record Setup Screen Event Action SetupAlarm In Event Action Alarm Out setup screen Motion Detector Event Action Record setup screen Motion Detector Event Action Alarm Out setup screen Text-In Event Action Record setup screen Text-In Event Action Alarm Out setup screen Video Loss Event Action Record setup screen Video Loss Event Action Alarm Out setup screen OSD On-Screen Display Setup Display SetupUser’s Manual Main Monitoring Setup screen

DX-TL4E specifications

The Epson DX-TL4E is a versatile and high-performance thermal transfer printer designed to cater to various printing needs in professional settings. This model stands out due to its advanced technologies and features, making it an ideal choice for businesses requiring reliable and high-quality printing solutions.

One of the hallmark characteristics of the DX-TL4E is its exceptional print quality. Equipped with Epson's state-of-the-art PrecisionCore technology, this printer delivers crisp, vibrant images with remarkable clarity, ensuring that every print is sharp and visually appealing. The printer supports various media types, allowing users to print on labels, tags, and a wide range of substrates, making it adaptable to diverse applications from industrial labelling to retail signage.

The DX-TL4E boasts a high-speed printing capability, making it suitable for high-volume printing environments. With a fast print speed, this model can efficiently produce a large number of prints in a short period, increasing productivity and reducing operational downtime.

Another notable feature of the DX-TL4E is its user-friendly design. The printer is equipped with an intuitive control panel that simplifies operation, enabling users to navigate through menus and settings effortlessly. This accessibility is further enhanced by the printer's compatibility with various operating systems and devices, ensuring seamless integration into existing workflows.

In terms of maintenance, the DX-TL4E is designed for easy upkeep. Its modular construction allows for straightforward access to key components, facilitating swift replacements and reducing the chances of prolonged downtime due to maintenance issues. Additionally, the printer's energy-efficient design makes it an environmentally sustainable choice for businesses looking to reduce their carbon footprint.

Connectivity options are another highlight of the DX-TL4E. It supports USB and Ethernet interfaces, ensuring that it can be easily connected to various network configurations and shared among multiple users. This flexibility allows for streamlined operations in busy work environments.

In summary, the Epson DX-TL4E is a powerful thermal transfer printer that excels in print quality, speed, and usability. With its advanced technologies, user-friendly interface, and robust connectivity options, it is an excellent addition to any professional setting. Whether for manufacturing, retail, or logistics, the DX-TL4E stands out as a reliable and efficient printing solution tailored to meet the demands of modern businesses.
Top Page Image Contents