User’s Manual
Figure 28 — System Check (Alarm Out / Notify) screen.
Highlight the box under the Alarm Out heading and press the 
button. A drop menu displays available alarm outputs for the recording problem. Highlight the desired alarm output from the external alarm out terminal or internal buzzer, and press the 
button.
NOTE: Alarm Out cannot be set to Check Point – System.
Highlight the box under Notify and press the 
button. This toggles between On and Off. When it is On, the DVR notifies the remote site of its System (Good) and Record (Bad).
Storage Screen
Highlight Storage in the Main menu and press the 
button. The Storage setup screen appears.
Figure 29 — Storage screen.
The Type field displays the type and capacity of storage device.
The Status field displays the device status or fault conditions. (Good, Disk Bad, S.M.A.R.T. Alert, High Temperature, or Not installed)
20