Elite Screens F100NWH manual Retract the screen into case, Closing it up, Draw the base feet back

Page 13

Putting screen away

1. Retract the screen into case:

Press the screen’s handle slowly in a downward motion and allow the screen to retract back gently into the housing.

2. Closing it up:

Snap the buckles into place at both ends and verify that the screen’s box is closed securely.

3. Draw the base feet back:

Slightly lift one end of the box at a time and rotate the two feet on the bottom of the box until they are in parallel alignment with the box.

Rev 1.0

Image 13

Contents Elite ez Cinema Series Parts Identification Extend the base feet InstallationVertical Adjustment Installing the support rodOpen the box cover Pull up the screenAdjusting the screen Retract the screen Pulling down the screenPulling out the support rod Draw the base feet back Storing the support rodStoring the screen Please visit the link below for full warranty information TWO WAY to Register Your Warranty with Elite Screens INC Elite ez Cinema Plus Series Precautions Pulling up the screen Extend base feetClosing it up Retract the screen into caseDraw the base feet back Storing the screen TWO WAY to Register Your Warranty with Elite Screens INC