Elite Screens F100NWV, F84NWV, F100NWH, F84NWH, F60NWV, F72NWV Installation, Extend the base feet

Page 3

Precautions:

Warning! Screen damage can result from product mishandling if the enclosed precautions are not followed.

In accordance with practicing home fire safety and to avoid screen damage, do not place the screen near or beside a fireplace or high temperature appliances such as a gas stove, BBQ or heater. (Fig. 1)

Fig.1

Fig.2

Place the screen beyond the reach of children. (Fig.2)

Operational Instructions:

Installation:

The EZ-Cinema screen is designed to be used as an easy to operate portable screen for a variety of presentation environments. Its design enables it to be versatile for use in either classroom, conference room, home or patio presentations. When packed, the unit carries with ease and opens up for projection presentations within seconds. As a general rule, portable projector screens should be installed in an area free from wind and heat or open flame sources such as a heater, BBQ grill or fireworks display.

Extend the base feet:

Locate the base feet on the bottom of the box cover at each end and rotate the base foot until it forms a right angle between the footboard and the cover box.

Rev. 1.0

Image 3
Contents Elite ez Cinema Series Parts Identification Extend the base feet InstallationPull up the screen Installing the support rodVertical Adjustment Open the box coverAdjusting the screen Pulling down the screen Retract the screenPulling out the support rod Storing the support rod Draw the base feet backStoring the screen Please visit the link below for full warranty information TWO WAY to Register Your Warranty with Elite Screens INC Elite ez Cinema Plus Series Precautions Pulling up the screen Extend base feetRetract the screen into case Closing it upDraw the base feet back Storing the screen TWO WAY to Register Your Warranty with Elite Screens INC