Introduction

System Remote Control

SR-250

User Guide

Before you start to use the Control4® SR-250 (models

C4-SR250-Z-B and C4-SR250B-Z-B), ensure that the devices in your Control4 system are added and configured. Note: The SR-250B runs on OS 2.0 and later.

Uses and Features

The System Remote Control SR-250 (or SR-250) is intended to be used with a Control4 system. Use this guide along with the Control4 System Quick Start Guide and Control4 System User Guide online help for best results. These are located in my.control4.com.

Use the System Remote Control to:

•Navigate system menus and access media on a TV monitor using the On-Screen Navigator.

•Navigate system menus and access media using the System Remote Control’s List Navigator.

This System Remote Control extends the capabilities of a ‘univer- sal’ remote that simply learns the IR codes from TVs, VCRs, and CD/DVD players.

Features:

•Bi-directional communication with system components.

•Backlit display that converts the Control4 Navigator into a text format.

•47 buttons total: 2 for quick access, 4 programmable, 8 transport control, plus alphanumeric keys.

•ZigBee wireless.

•Wake up when picked up or moved.

Battery Maintenance

Refer to the System Remote Control SR-250 Setup Guide for instructions about how to install and maintain the batteries.

This device requires four (4) AAA batteries.

For battery safety information, see the System Remote Control SR-250 Setup Guide.

System Remote Control (SR-250) Buttons

The list below show the buttons to use with your Control4 system.

Room Off: Turns off the devices in the room.

Room and List Navigator: Lists room, op- tions, current time.

List: Displays system list in window. Use with arrow and Select buttons.

Ambient Light Sensor: Enables backlight on

buttons when the room is dim.

Watch/Listen: Watch movies, TV. Listen to the radio, CDs, etc.

4: Press to turn on TV and the On-Screen Navigator.

Programmable Buttons: Have your Installer program these buttons for shortcuts. See “Programmable Buttons” below

to identify and write down the functions.

Guide: Displays the channel guide (program lists) for the device’s channels On-Screen. Also used to toggle List or Grid views.

Prev: Goes to the previous screen.

PG Up/PG Dn: Pages up or down for the device’s menus.

Vol +/ Vol -:Increase or decrease the volume.

Left/Right, Up/Down Arrows: Moves through the List Navigator or On-Screen. Select: Selects an option on the On-Screen or List Navigator.

Ch +/ Ch -:Move up or down channels.

MUTE: Mutes the audio.

INFO: Displays current channel/program info for the device.

MENU: Displays the menu for devices.

CNCL: Cancel last action for the device.

Play: Plays a movie or video.

Skip Forward/Skip Back: Skips through a movie or video.

Pause: Pauses the movie or video. Press Play to start.

Fast Forward/Rewind: Advances or rewinds

the movie or video.

DVR: Plays the DVR (digital video recorder) or device.

Stop: Stops the movie or video. Press Play to start.

Record: Activates the current device’s record function.

Alphanumeric Keypad: Use to type letters or numbers if you have an on-screen keyboard, or to change channels, set light levels, or enter text.

Programmable Buttons

If your Installer programs the colored buttons, note here what they represent:

•Red: __________________________________________

•Green: ________________________________________

•Yellow: ________________________________________

•Blue: __________________________________________