Sharp AR-163, AR-162 User Maintenance, Transfer charger cleaning, Turn the power switch off

USER MAINTENANCE

Transfer charger cleaning

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure.

1 Turn the power switch off.

Open the bypass tray. Lift slightly on the side cover and

2 slide the cover out until it stops.

	Gently lift and pull out the paper tray and take the
Charger cleaner	3 charger cleaner out by holding the tab.

Set the charger cleaner onto the transfer charger and

4 gently slide the cleaner in the direction indicated by the arrow two or three times.

Slide the charger cleaner from one end to the other end

along the groove of the transfer charger. If the cleaner

is stopped on the way, smudges on copies may occur.

●If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth.

Return the charger cleaner to its original position.

5 Close the paper tray. Close the side cover by pressing the handle on the cover.

6 Turn the power switch on.

GENERAL INFORMATION User maintenance

45