COPIER TROUBLE?

Problem

 

Solution

 

 

 

 

 

Is

blinking in the copy

The toner cartridge is not installed. Install the

 

quantity display?

toner cartridge. If "CH" is blinking even if the

 

 

 

cartridge is installed properly, contact your

 

 

 

SHARP service centre immediately.

 

 

 

 

 

Is

steadily lit in the copy

Side cover(s) is open.

 

quantity display?

Close the front and side covers securely.

Power is on but copying

 

 

 

is not possible.

Is the

indicator blinking?

The toner cartridge must be replaced. See page

 

 

 

 

28, TONER CARTRIDGE REPLACEMENT.

 

 

 

 

 

Is the

indicator blinking?

A misfeed has occurred. See page 30,

 

 

 

MISFEED REMOVAL.

 

 

 

Lighting fixture flickers.

Is the same power outlet used for

Connect the copier to a power outlet which is

the lighting fixture and the copier?

not used for other electric appliances.

 

 

 

 

 

GENERAL INFORMATION Copier trouble?

Be sure to use only genuine SHARP parts and supplies.

Please contact your SHARP service centre immediately if a problem persists after checking the above.

Self-diagnostic function

An automatic self-diagnostic function is built into the copier. Should the copier malfunction, the self-diagnostic function will locate the problem and stop the copier to prevent damage. An alphanumeric code will appear in the copy quantity display.

Example

Should the copier completely stop and a letter and a number appear alternately, contact your SHARP service centre immediately.

48

Page 50
Image 50
Sharp AR-162, AR-163 operation manual Self-diagnostic function, Example