Sharp AR-162, AR-163 Loading Copy Paper, Gently lift and pull out the paper tray until it stops

GETTING STARTED

Loading copy paper

LOADING COPY PAPER

To save space, this copier has been designed with an adjustable front-loading tray, which is easily opened for paper loading. For best results, use only SHARP recommended paper. (See page 49.)

The paper required ( ) indicator will light up when there is no copy paper in the selected paper feed station, or when the selected paper tray is not installed or is improperly installed.

When the paper size is changed in a paper tray, the size of the paper must be entered by steps 8 through 11 on page 12. If not, the edges of copies may become smudged with toner. Also, the AUTO PAPER SELECT and the AUTO IMAGE features will not function properly.

1 Gently lift and pull out the paper tray until it stops.

2

3

Maximum height line

Push the pressure plate down until it locks in place.

Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks.

●If you change to a different size of copy paper, the tray must be adjusted. See the next page.

●Set the paper along the guides.

●The tray holds up to 250 sheets of paper.

Do not load paper above the maximum height line.

4 Push the paper tray firmly back into the copier.

10