Manuals / Sharp / Computer Equipment / All in One Printer

Sharp AR-163 Toner Save Mode, Press the AUTO/MANUAL/PHOTO / / key to 1 select the MANUAL mode

Models: AR-163 AR-162

1 80

Download 80 pages 10.56 Kb

Page 29

TONER SAVE MODE

TONER SAVE MODE

This mode reduces toner consumption by approximately 10% in the automatic and manual exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode does not affect the PHOTO mode. Follow the procedure below for setting the toning level.

Press the AUTO/MANUAL/PHOTO (/ / ) key to

1 select the MANUAL ( ) mode.

2/ ) key for approximately 5 seconds.

●The MANUAL ( ) indicator will go out and the PHOTO ( ) indicator will begin to blink.

●The exposure indicator marked “5” will light up, indicating that the

standard toner mode is active./Press and hold down the AUTO/MANUAL/PHOTO (

MAKING COPIES

Toner save mode

3

4

To enter the toner save mode, press the light () key.

●The exposure indicator marked “1” will light up, indicating that the toner save mode is selected.

Press the AUTO/MANUAL/PHOTO (//) key.

●The PHOTO () indicator will stop blinking and will light up steadily. The toner save mode is now active.

●To return to the standard mode, repeat the procedure but use the dark () key to select exposure level “5” in step 3.

27

Image 29

Sharp AR-163, AR-162 operation manual Toner Save Mode, Press the AUTO/MANUAL/PHOTO / / key to 1 select the MANUAL mode

Contents

Page MODELSTATUS INDICATORS AR-163Cautions on laser CAUTIONSSTATUS INDICATORS CONTENTS PageGETTING STARTED MAKING COPIESAB series metric and inch series references INTRODUCTIONConventions used in this manual Substantial copying features MAIN FEATURESOptional features High-speed laser copyingOverall layout PART NAMES AND FUNCTIONSFusing unit release levers PART NAMES AND FUNCTIONSAccessories Toner cartridge lock release leverPART NAMES AND FUNCTIONS Operationpanel Inch system PART NAMES AND FUNCTIONSCOPIER INSTALLATION CAUTIONS ON HANDLING 1 Gently lift and pull out the paper tray until it stops LOADING COPY PAPERPush the pressure plate down until it locks in place 4 Push the paper tray firmly back into the copierSqueeze the lock lever of the front guide and slide the LOADING COPY PAPER3 front guide to match the width of the paper Left guideUse the TRAY SELECT key to select the paper tray ENTER9 of which the paper size has been changed Press the START key and then the PAPER SIZE 11 ENTER keyAUDITING ACCOUNTS Enter your account number using the numeric keysWhen copying is completed, press the AUDIT CLEAR 2 key Adjust the copy density Turn the power switch onNORMAL COPYING Place the original face down on the original table. AlignSet the number of copies using the numeric keys How to remove the platen coverNORMAL COPYING Press the START keyAutomatic REDUCTION/ENLARGEMENT/ZOOMPlace the original on the original table and close the 1 platen cover Press the ORIGINAL SIZE ENTER key until theEnsure that copy paper of the desired size is installed in Use the PRESET RATIO selector , keys and theREDUCTION/ENLARGEMENT/ZOOM ManualSet the paper guides to the copy paper width BYPASS FEED special paper1 Unfold the bypass tray 5 the number of copies if using standard copy paper or envelopes Leave the copy quantity at 0 if using special papers. SetBYPASS FEED special paper Press the TRAY SELECT key to select the bypass 4 trayPlace the first original on the original table and make a 1 copy TWO-SIDED COPYINGReplace the first original with the second original and 2 close the platen coverXY ZOOM Use the PRESET RATIO selector , keys and zoomPress the XY-ZOOM key 3 , keys to change the copy ratio in the vertical direction7 the paper tray XY ZOOM8 Enter the desired number of copies 9 Press the START key Use the PRESET RATIO selector , keys and zoomPress the B/W REVERSE key Check the copy paper size B/W REVERSEMake all other desired copier selections and press the START key Place the original on the original table and close the 1 platen coverPlace the originals on the original table with the centre DUAL PAGE COPYPress the DUAL PAGE COPY key 3 Set the number of copies 4 Press the START keyWhen all INTERRUPT copies are finished, press the When the copier stops, remove the originals and setINTERRUPTING A COPY RUN Press the INTERRUPT keyPress the AUTO/MANUAL/PHOTO / / key to 1 select the PHOTO mode AUTOMATIC EXPOSURE ADJUSTMENT2/ key for approximately 5 seconds “3”./Press and hold down the AUTO/MANUAL/PHOTOPress the AUTO/MANUAL/PHOTO / / key to 1 select the MANUAL mode TONER SAVE MODETo enter the toner save mode, press the light key 2/ key for approximately 5 secondsGENUINE SUPPLIES TONER CARTRIDGE REPLACEMENTOpen the bypass tray. Lift slightly on the side cover and 1 slide the cover out until it stops1 seconds until all the alarm indicators TONER CARTRIDGE REPLACEMENTToner cartridge life Gently insert the toner cartridge along the guides untilMisfeed in the bypass tray MISFEED REMOVALMisfeed in the copier First confirm the misfeed locationMISFEED REMOVAL B. Misfeed in the fusing areaCheck the misfeed location. Remove the misfed paper A. Misfeed in the paper feed areaTurn the roller rotating knob in the direction of the 2 arrow Carefully remove the misfed paper. Lower the fusingC. Misfeed in the transport area Open the paper guide by pressing down the projectionClose the side cover by pressing the handle on the 3 cover Misfeed in the paper trayGently lift and pull out the paper tray and remove the 1 misfed paper 2 Close the paper trayDEVELOPER REQUIRED MAINTENANCE REQUIREDList of user programs USER PROGRAMSEnter a program number using the numeric keys Setting the user programsUSER PROGRAMS and blink and “- -” appears in the copy quantity displaySelect the desired parameter using the numeric keys To continue with other user programs, press the keyUSER PROGRAMS Press the START keyProgram No. 10 Auditing mode Settings for auditing accounts1. Select the desired setting using the numeric keys 1. Enter a 3-digit account number using the numeric keysUSER PROGRAMS Program No. 12 Account number change 3. Enter a new account number using the numeric keysProgram No. 13 Account number deletion 1. Use the copy ratio display key to select the account1. Use the copy ratio display key to select the account number USER PROGRAMS Program No. 14 Number of copies per account2. Press and hold down the 0 key Example 1,234 copies1. To reset an individual account, press the 0 key USER PROGRAMS Program No. 15 Resetting accountTo reset all accounts, press key 2. Press the START key number to be resetAuto power shut-off mode POWER SAVE MODESPreheat mode Setting the power save modes POWER SAVE MODESCopying from the preheat mode Copying from the auto power shut-off modeBypass tray paper feed roller USER MAINTENANCEOriginal table and platen cover Transfer charger cleaning USER MAINTENANCE1 Turn the power switch off 3 charger cleaner out by holding the tabCOPIER TROUBLE? ProblemSolution COPY/FAX key COPIER TROUBLE?Problem SolutionProblem Self-diagnostic functionSolution COPIER TROUBLE?Types and sizes of copy paper SUPPLIESGenuine supplies statement SUPPLIESProper storage 1. Store the supplies in a location that isGENERAL SPECIFICATIONSSPECIFICATIONS OPTIONAL EQUIPMENT CONTENTSSYSTEM CONFIGURATION PART NAMES SpecificationsSINGLE PASS FEEDER AR-SP2 Press the START key Using the SPFSINGLE PASS FEEDER AR-SP2 4 misfeed location indicator Open and close the document feeder cover to cancel theMisfeed removal Close the left feeding roller coverELECTRONIC SORTING KIT AR-EB3 Rotation copyingGroup mode Sort modeIf the offset stack mode is disabled, copies will not be offset The offset stack mode is enabled in the factory default settingPress the SORT/GROUP / key to select the SORT mode Copying in the sort modeSet the originals face up in the document feeder tray Set the number of copies and press the START keyIN 1 indicator then press and hold the 2 IN 1 indicators are not lit then press and hold the 2 IN2 in 1 or 4 in 2 with the desired paper size6 the selection Press the 2 IN 1 / 4 IN7 Set the number of copies Press the START key The entered number will light up steadilyErase Press the ERASE / key to select the desired 2 erase modeCheck the copy paper size AB A BElectronic sorting kit AR-EB3 OPTIONAL EQUIPMENT Set the number of copies Press the START keyELECTRONIC SORTING KIT AR-EB3 Place the original on the original table and close the platen cover Margin shiftPress the MARGIN SHIFT key Check the copy paper size ELECTRONIC SORTING KIT AR-EB32x250-SHEET PAPER FEED UNIT AR-DE6 250-SHEET PAPER FEED UNIT AR-DE5Loading copy paper 250-sheet paper feed unit AR-DE5Misfeed removal 250-SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6Close the paper tray and the side cover AR-DE6 AR-DE5Specifications 250-SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6INDEX INDEX Section 1. Product Identification MATERIAL SAFETY DATA SHEETSection 2. Supplier’s Name and Address Section 3. IngredientsSection 9. Precautions for Safe Handling and Use Section 6. Physical Chemical CharacteristicsSection 7. Fire and Explosion Data Section 8. Reactivity DataProduct Identification SectionSupplier’s Name and Address IngredientsSection 9. Precautions for Safe Handling and Use Section 6. Physical Chemical CharacteristicsSection 7. Fire and Explosion Data Section 8. Reactivity DataMEMO This product is a class A product CLASS LASER PRODUCT LASER KLASSECLASS 1 LASER PRODUCT LASER KLASSE LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARATFor a complete electrical disconnection, pull out the main plug SHARP CORPORATION PRINTED IN CHINAAR-163