Sharp AR-163, AR-162 operation manual User Programs, List of user programs

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or cancelled as desired.

List of user programs

This copier has the following user programs.

Program No.	Program name	Description
1	Auto clear time	Sets the auto clear time. The copier returns to the initial settings
		when the auto clear time elapses after the last copy is made.
2	Preheat mode	Sets the time that elapses before the copier enters the preheat
		mode after any operation is made. See page 42.
3	Auto power shut-off	Sets the time that elapses before the copier enters the auto power
	timer	shut-off mode after any operation is made. See page 42.
4	Stream feeding	Enables or disables the stream feeding mode when an optional
	mode*	SPF is installed. See page 56.
5	Auto power shut-off	Enables or disables the auto power shut-off mode. See page 42.
	setting
6	Border line for 2 in 1 or	Enables or disables the border line which is printed in 2 in 1 or 4 in 1 copy-
	4 in 1*	ing when an optional electronic sorting kit and an optional SPF are installed.
		See page 61.
7	Rotation copy*	Enables or disables rotation of original images. See page 58.
8	Auto paper select mode	Enables or disables the auto paper selection. See page 14.
9	Auto tray switching*	Enables or disables the automatic tray switching which occurs when paper
		in a tray runs out. (This switching cannot switch to the bypass tray.)
10	Auditing mode	Enables or disables the auditing mode, which controls access to
		copier. See page 13.
11	Account number	Registers accounts for auditing mode.
	entry
12	Account number	Changes account numbers for auditing mode.
	change
13	Account number	Deletes accounts for auditing mode.
	deletion
14	Number of copies	Displays the total number of copies made against account numbers.
	per account
15	Resetting account	Resets all audit accounts or resets any desired individual account.
16	Erase width adjustment*	Sets the amount of the edge erase and centre erase areas. See page 63.
17	Layout in 2 in 1 copy*	Selects a pattern for 2 in 1 copying. See page 61.
18	Layout in 4 in 1 copy*	Selects a pattern for 4 in 1 copying. See page 61.
19	Offset of paper output	Enables or disables the offset function of the paper output tray. The offset
	tray	function can be specified respectively for the upper and lower areas
		separated by an optional job separator tray. See page 59.

* These programs do not affect the copier functions unless certain optional equipment is installed.

GENERAL INFORMATION User programs

35