USER PROGRAMS
Setting the user programs
Press and hold the light (
) key for more than 5
1 seconds until all the alarm indicators ( 
, 
, 
, ,
and 
) blink and “–
GENERAL INFORMATION User programs
2
For operation of these programs after step 3, see page 38.
Enter a program number using the numeric keys.
●The selected program number will blink in the copy quantity display.
●If a mistake is made in steps 2 to 4, press the CLEAR (
) key. The copier will return to step 2.
●The program numbers are shown in the table below.
For example, to change the setting of the auto power
Program name | Program No. |
Auto clear time | 1 |
|
|
Preheat mode | 2 |
|
|
Auto power | 3 |
|
|
Stream feeding mode | 4 |
|
|
Auto power | 5 |
|
|
Border line for 2 in 1 or 4 in 1 | 6 |
|
|
Rotation copy | 7 |
|
|
Auto paper select mode | 8 |
|
|
Auto tray switching | 9 |
|
|
Auditing mode | 10 |
|
|
Account number entry | 11 |
|
|
Account number change | 12 |
|
|
Account number deletion | 13 |
|
|
Number of copies per account | 14 |
|
|
Resetting account | 15 |
|
|
Erase width adjustment | 16 |
|
|
Layout in 2 in 1 copy | 17 |
|
|
Layout in 4 in 1 copy | 18 |
|
|
Offset of paper output tray | 19 |
|
|
Press the START (
) key.
3 ● For programs 1 to 9 and 16 to 19, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.
●For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 38 for setting programs 10 to 15.
36
