LOADING COPY PAPER
GETTING STARTED
Loading copypaper | To set the selected paper size, press the PAPER SIZE | ||
8 | |||
ENTER ( | ) key. | ||
| ● The selected paper feed location indicator will blink and the corre- | ||
| sponding paper size (which is currently set) indicator will light up | ||
| steadily. All other indicators will go out. | ||
| For paper size setting, ensure that the COPY mode | ||
| has been selected. However, if copying, printing or | ||
| facsimile printing is being performed, paper size setting | ||
| cannot be made even in the COPY mode. See Note | ||
| on page 47. | ||
Use the TRAY SELECT (
) key to select the paper tray
9 of which the paper size has been changed.
● Each time the TRAY SELECT (
) key is pressed, a paper tray will be indicated with a blinking paper feed location indicator. If an optional paper feed unit is not installed, this operation is not needed.
10 |
Use the ORIGINAL SIZE ENTER (
) key to select the paper size which is set.
●Each time the ORIGINAL SIZE ENTER (
) key is pressed, a paper size will be indicated with a paper size indicator.
Press the START (
) key and then the PAPER SIZE
11 ENTER (
) key.
●To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START (
) key.
12
