Maintenanceandprecautions

See page 14 for the details of discs

which you can use with your

camcorder.

Notesonuse

• Hold the disc by its edge while supporting the
center hole lightly. Do nut tuuch therecording
side (the opposite ofthe printed side when using
a single-sided disc).
• Before shooting, be sure to remove dust and
fingerpriuts fronl tile disc with asol: cloth.
Otherwise you may nut be able to record or play
normally insome situations using that disc.
• When you set the disc in your camcorder, press
firmly until it clicks. When themessage
[C: 13:DD] appears on tile LCD screen, open
tile disc cover and set the disc again.
• Do not attach any adhesive material such as a
sticker on the surlace of adisc. ]f you do so, the
disc may become unbalanced, and this may
cause a malfunction of the disc or your
camcorder.

Useofdouble-sideddiscs

Double-sided disc's allow you lu recoM both sides
ol a disc.

NRecordingonthe A side

Place the disc in your camcorder with the

side with the [] symbol at the center facing

outwards until it clicks.

[] symbol
Place tile __ symbol facing uulwards.
Recording ismade onthe rearside.
g
• When using a double-sided disc, lake care not lu
smudge the surlace with fillgerprinls. _"
• When a double=sided disc is used in your ca
camcorder, recording/playback are perlurmed
on lhat side only. You cannot switch lo record _.
on orplay back the ufller side with tile disc sel to =l
the camcoMer. When recording/playback ol one
side is complele, remove the disc and lurn il
over to access the other side.
• Per[k>rm the lollowiug operations on each side
ol a double-sided disc:
Finalizing (p. 68)
Formatting (p. 73)
Unlinalizing (p. 75)

Continued.* 119