Playingthe imageson a TV

Connect your carncorder to the input jack ofa TV or VCR using the A/V connecting cable []
or an A/V connecting cable with SVIDEO [_. Connect your carncorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this operation (p. 22). Refer also to the instruction
manuals supplied with the devices to be connected.

f

Device without
S VIDEO jack
IN
VIDEO
L_20 o2
<Red)

I

Device with
S VIDEO jack
IN S VIDEO
@
VIDEO
G
(AUDIO4
(Red)
:XJ
€_
..... : Signal flow
[] A/Vconnectingcable(supplied)
Connect tothe input j_c'kof the other device.
[] A/Vconnectingcable with S VIDEO (sold
separately)
When connecting tothe other device via the S
VIDEOjack, byusing anA/Vconnecting cable
withS VIDEO (sold separately), higher quality
images can be produced than withan A/V
connecting cable. Connect the white and red
plugs (left/right audio) andthe S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with SVIDEO (sold separately). The
yellow plug connection is not necessary.
Connecting only the S VIDEO plug will not
output audio.
VCRs or TVs
WhenyourTVisconnectedtoaVCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1,VIDEO 2, etc.),
ifthe VCR has an input selector.
Tosettheaspectratioaccordingto
theconnectedTV(16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
@ Turn on your camcorder.
@ Touch _ (HOME) --_ _,_(SETTINGS)
--_ [OUTPUT SETTINGS] --_ [TV TYPE]
--_ [16:9] or [4:3]--_ [_.
Continued_ 47