Onthepickuplens

• Do nottouch the pickup lens inside the disc
cover. Keep the disccover closed except when
inserting and removing the disc, tokeep dust
out.
• When your camcorder does not work because
the pickup lens is dirty, clean it with a camera
blower (sold separately). Do nottouch the
pickup lens directly during cleaning, because
this may cause the cunlcorder tomalfunction.
Pickup lens

__ ...........

Aboutcareandstorageofthelens

• Wipe the surface olthe lens clean with a soft
cloth ill lhe lollowing instances:
When lhere are fingerprints nn the lens
snrlhce.
Inhol nrhumid localions
When lhelens is exposed to sally air such as
altile seaside.
• Slore illa well-ventilaled localion subjecl to
litlle dirl or dusl.
• Tn prevent mold, periodically clean tile lens as
described above. Itis recommended lhal yon
operate ynur cam(order abonl nnce a monlh to
keep it illoptimum slale for a long lime.

Cleaninginsidetheviewfinder

Remove any dust from inside the
viewfinder by following the steps below.
(_) Pull out the viewfinder.
@ While pushing in the tab on the bottom of
the viewfinder with a fine-tipped object
such as a ball point pen, pull the eyecup
block in the direction of the arrow to
rcnlove.
@Remove (lust from the eyecup block with a
camera blower, el(.
(_) Press the viewfiuder onto the body of the
cam(order.
(_) Remove dust from the inside area where
the eyecup block was attached with a
camera blower, etc.
=_
(_) AItach the eyecup block lo 1he viewfinder, mi
pushing il straight on until it clicks. N"
i.
O Notes
Tile eyecup block isa precision part. Dn not
disassemble it further.
• Dn not tnuch tile lens nf the eyecup block.
¢ontinuod"_125