Sony DVD850 manual Is indicated on an image Visual Index screen, Playback image is distorted

"F-_"is indicated on an image in the

VISUAL INDEX screen.

•Loading of the data may have failed. It may be indicated correctly when you turn off the power and then turn it on again, or repeat removing and inserting the "Memory Stick PRO Duo" media a couple of times.

•You removed the battery pack or the AC Adaptor while the access lamp is flashing. This operation may damage the image data, which will be marked with [-'?'].

•This may appear on still images recorded on other devices, edited on a computer, etc.

"[]" is indicated on an image in the

VISUAL INDEX screen.

•Perform [REPAIR IMG.DB F.] (p. 77). If it still appears, delete the image marked with

[] (p. 50).

No sound or only a quiet sound is

heard during playback.

•Turn up the volume (p. 36, 44).

•Sound is not output when the LCD screen is closed. Open the LCD screen.

•When you record sound with [MICREF LEVEL] set to [LOW] (p. 94), the recorded sound may be difficult to hear.

You cannot play back the disc, or the

disc is not recognized.

•Clean the disc using a soft cloth (p. 120).

•Finalize the disc (p. 68).

•A disc recorded in VR mode cannot be

played back on a device that does not support

VR mode. Check the compatibility in the instruction manual of the playback device.

The playback image is distorted.

• Clean the disc using a soft cloth (p. 120).

"l-?]"is indicated on an image in the

DVD menu.

•Loading of the data may have failed while finalizing the disc. For the following discs, make the disc capable of additional recording (p. 75), then remake the DVD menu by finalizing the disc again (p. 68). The DVD menu may be displayed correctly.

-DVD-RW (VIDEO mode)

DVD+RW

Playback freezes for an instant between the scenes.

•The image may freeze for an instant between scenes depending on the device being used. This is not a malfunction.

•In the case of a DVD+R DL, the image may freeze for an instant when the recording layer changes. This is not a malfunction.

Playback does not move to the

previous scene when you press I_1_1.

•If phtyback crosses 2 titles made

automatically by your camcorder when

is pressed, playback may not move to the

previous	scene.		Select	the desired		scene from	o
							=
the menu		screen. Refer		to the	instruction		_"
manual	of	the	playback	device	for	further	=-
inl'ormation.

g=

When you play the disc on a

computer or another playback

device, the left and right sounds are heard out of balance (DCR-DVD850).

•This may hal)pen when sound recorded with 5.1ch surround is converted to 2ch (normal stereo sound) on a computer or another

playback device (p. 40). This is not a malfunction.

•ffthe playback device is a 2ch stereo system, change the audio conversion system (downmix system). For details, refer to the instruction manuals of the playback device.

•When you create a disc using the supplied "PMB" software, select 2ch for the audio setting.

Continuod"_ 107