Step2: Chargingthe batterypack

POWER switch
22
Battery
Jack cover
DC plug
DC IN jack
CHG(charge) lamp5_--'_5 HG i
Tothe wall outlet
ACAdaptor 4 (wall socket)
Powercord (mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 121) after
attaching it to your camcorder.
(3 Notes
•Your camcorder operates only with
"InfoLITHlUM" battery pack (H series).
4
/ Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery isfully charged.
Disconnect the AC Adaptor from
the DC IN jack.
e.t
/Attach the battery pack by sliding
itin the direction of the arrow
until itclicks.
3Connect the AC Adaptor to the
DC IN jack of your camcorder.
Open the,jack cover, and connect the
DC plug of the AC Adaptor.
Match the • mark on the DC plug with
the • mark on your camcorder.
(3 Notes
•Disconnect the AC Adaptor fronl the DC 1N
jack holding both the camcorder and the DC
plug.