Fujitsu P50XTS51E, P-TU5051E, P42HTS51E, P-TU4251E Other Basic Operations, Convenient Functions

OTHER BASIC OPERATIONS

CONVENIENT FUNCTIONS

Still Picture

Press ,.

The currently viewed scene can be viewed as a still picture.

Convenient when you want to take a note, etc. Press again to return to the normal picture.

DISPLAY

Displaying on-screen information.

Press 3.

The channel or mode is indicated on the screen for 5 seconds.

Picture Mode

Press 4.

This button can be used to switch the picture mode.

In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Setting Picture Mode (P. E-34)”.

Picture Memory

Press 5.

This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is pressed, the setting changes as follows.

* For the picture memory settings, see “Setting Picture Memory (P. E-35)”.

Audio In

Press 6.

Switches the input audio. Each time this button is pressed, the input changes as follows. [When other than HDMI input was selected]

[For HDMI]

*Digital audio input handles PCM only.

*The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier)*.

Dual channel switching

Press G.

This function enables selection of the audio mode when there is a dual-channel broadcast. Each time this button is pressed, the mode is switched as shown in the figure below.

Depending on the broadcast, this function may not be available.

OFF-timer

Press 7.

This can be used to set the time before the power is turned off (stand-by state). Each time this button is pressed, the setting changes as follows.

Note

• Functions may not be available with some models and some device options.

Downloaded From TV-Manual.com Manuals E-29

Póññêèé Português Italiano Français Español Deutsch English

中文

日 本 語