OTHER ADJUSTMENTS (Continued)
SETTING THE INPUT TERMINALS
•Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time EFis pressed, the setting is switched. Press <to store.
*RGB input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press Eor F, one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and
[Other than Auto]: You need to select a system appropriate to the input signal. Press <to store.
CHANNEL SETTING
Press Cor Dto select the items for setting. It is switched as shown as below.
Press <to proceed to the next step.
Auto Store
Press Eor Fto select the country or region, and then press <.
Input Terminal Settings Screen
All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
*Several minutes are required to scan all the channels. To cancel the operation in progress, press ;.
*See page
Manual Store | Channel Settings Screen |
|
Press Eor Fto select the Program No. to be stored.
Press Cor Dto select the Manual Store items to be set (Setting or Name). Press <to proceed.
Setting
Press Cor Dto select the setting item.
•Freq.
Each time Eor Fis pressed, the TV frequency is switched.
•System
Each time Eor Fis pressed, the TV SYSTEM is switched.