Nikon S2600 manual Sound Settings, Adjust the following sound settings, C Auto Off Settings

The Setup Menu

Sound Settings

Press the d button Mz tab MSound settings

Adjust the following sound settings.

Option	Description
	Select On (default setting) or Off. When On is selected, a beep
	will sound once when operations are completed successfully,
Button sound	twice when the camera acquires focus on the subject, and
	three times when an error is detected. Start-up sound will also
	play when the camera is turned on.
	Select On (default setting) or Off. No sound is played with
Shutter sound	shutter release when some features such as continuous
	shooting or BSS (best shot selector) are enabled or recording
	movies, even if On is selected.

BNote About Sound Settings

In Pet portrait scene mode, button and shutter sounds are disabled.

Auto Off

Press the d button Mz tab MAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A21) to save power. In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.

CWhen the Monitor Turns off for the Power Saving Function

•Power-on lamp flashes in standby mode.

•Camera turns off after three minutes passes in standby mode.

•To reactivate the monitor while the power on lamp is flashing, press any of the following buttons: - Power switch, shutter-release button, A button, c button or b (emovie-record) button

CAuto Off Settings

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

•When a menu is displayed: three minutes

•During slide show playback: up to 30 minutes

•When the AC adapter EH-62G is connected: 30 minutes

Reference Section

E59