Nikon S2600 manual Electronic VR, B Notes About Electronic Vibration Reduction, The Setup Menu

The Setup Menu

Electronic VR

Press the d button Mz tab MElectronic VR

Choose whether or not to use electronic VR (vibration reduction), which reduces the effects of camera shake during shooting.

Option	Description
	When taking still images, electronic vibration reduction is
	enabled when R(A6) is displayed in the monitor and all of
	the conditions below are met.
w Auto	• Flash mode is set to Off or Slow sync.
	• A slow shutter speed is used.
	• Continuous is set to Single.
	• The subject is dark.
	When recording movies, electronic vibration reduction is
	enabled at all times.

kOff (default setting) Electronic vibration reduction is disabled.

Reference Section

BNotes About Electronic Vibration Reduction

•The effectiveness of electronic vibration reduction decreases as camera shake increases.

•The image captured using electronic vibration reduction may be somewhat “grainy” in appearance.

•Electronic vibration reduction does not function under the following conditions or in the following shooting modes:

-When slow sync with red-eye reduction (A41) is used.

-When exposure exceeds a certain length of time.

-When ISO sensitivity (E28) is set to any setting other than Auto.

-When Blink proof (E35) in smart portrait mode is set to On.

-In the following scene modes: Sports (A41), Night portrait (A41), Dusk/dawn (A42), Night landscape (A42), Museum (A43), Fireworks show (A44), Backlighting (A44).

•The angle of view (the area captured in the recorded movie) during movie recording is smaller when electronic vibration reduction is enabled.

CElectronic Vibration Reduction

When Electronic VR in the setup menu is set to Auto and flash mode (A50) is set to W (Off) or Y (Slow sync), the w icon may be displayed in the monitor. When shooting conditions are likely to be affected by camera shake while w is displayed, the camera reduces the effects of camera shake on images before recording them.

E56