Nikon S2600 manual Troubleshooting, Hide info is selected for Photo info, Select Show info

Troubleshooting

	Problem		Cause/Solution	A
		•	Camera is off.	21
		•	Battery is exhausted.	20
		•	Standby mode for saving power. Press the	21
			power switch, shutter-release button, A
			button, cbutton, or b (e movie-record)
	Monitor is blank.	•	button.
			When flash lamp flashes, wait until flash has	50
		•	charged.
			Camera and computer are connected via	68, 71
		•	USB cable.
			Camera and TV are connected via audio/	68, E17
			video cable.
	Monitor is hard to read.	•	Adjust monitor brightness.	82, E53
		•	Monitor is dirty. Clean monitor.	F6
		•	If camera clock has not been set, “Date not	22, E50
			set” indicator flashes with shooting and
			movie recording. Images and movies
			recorded before clock is set are dated “00/
	Date and time of recording		00/0000 00:00” or “01/01/2012 00:00”
	are not correct.		respectively. Set the correct time and date
			from the Time zone and date option in the
		•	setup menu.
Technical			Check camera clock regularly against more	23, E50
			accurate timepieces and reset as required.
	No indicators displayed in	Hide info is selected for Photo info.		82, E53
	monitor.	Select Show info.
Notes
	Print date not available.	Camera clock has not been set.		22, 82,
and				E50
	Date not appearing on	•	The current shooting mode is one that does
Index
	images even when Print	•	not support Print date.	82, E55
	date is enabled.		The date cannot be imprinted on movies.
	Screen for setting time
	zone and date is displayed	Clock battery is exhausted; all settings were
	when the camera is turned			22, 23
		restored to their default values.
	on.
	Camera settings reset.

F8