Nikon S2600 manual Preparation 2 Charge the Battery

Preparation 2 Charge the Battery

Basic Steps for Shooting and Playback

1 Prepare the included Charging AC Adapter EH-69P.

• If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

* The shape of the plug adapter varies according to the country or region in which the camera was purchased.

The Charging AC Adapter comes with the plug adapter attached in Argentina and Korea.

2Make sure the battery is installed in the camera, and then connect the camera to the Charging AC Adapter in order of 1to 3.

•Keep the camera turned off.

•When connecting the cable, be sure that the camera connector is properly oriented. Do not use force when connecting the cable to the camera. When disconnecting the cable, do not pull the connector at an angle.

Charge lamp

Electrical outlet

USB Cable UC-E6 (included)

•The charge lamp slowly flashes green to indicate that the battery is charging.

•About 2 hours and 10 minutes are required to charge a fully exhausted battery.

•When the battery has been completely charged, the charge lamp turns off.

•See “Understanding the Charge Lamp” (A17) for more information.

3Disconnect the Charging AC Adapter from the electrical outlet and then disconnect the USB cable.

•When the camera is connected to the electrical outlet with the EH-69P, the camera cannot be turned on.

16