Nikon S2600 manual Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display		Cause/Solution	A
O(flashes)	Clock not set.		E50
	Set date and time.
Battery exhausted.	Charge or replace the battery.		14, 16
	Battery temperature is high.
	Turn off camera, and allow battery to cool down before
Battery temperature	resuming use. After five seconds, the monitor will turn off
	and the power-on lamp will flash rapidly. After the lamps		21
high
	flash for three minutes, the camera will turn off
	automatically. Pressing the power switch also turns off
	the camera.
The camera will turn	The camera has become hot.
off to prevent	The camera turns off automatically. Leave the camera off		75
overheating.	until it has cooled and then turn it on again.
	Camera cannot focus.
Q(● flashes red)	•	Refocus.	26, 29
	•	Use focus lock.	64
Please wait for the	Camera cannot perform other operations until recording			Reference
	is complete.
camera to finish			–
	Wait until message clears from display automatically
recording.
	when recording is complete.
Memory card is	Write-protect switch is in “lock” position.		–	Section
write protected.	Slide write-protect switch to “write” position.
This card cannot be	Error accessing memory card.
used.	•	Use approved card.	19
This card cannot be	• Check that connectors are clean.		18
read.	• Confirm that memory card is correctly inserted.		18
Card is not	Memory card has not been formatted for use in COOLPIX
	S2600.
formatted. Format
	Formatting deletes all data stored on the memory card.
card?			18
	Be sure to select No and make copies of any images you
Yes
	wish to keep before formatting the memory card. Select
No
	Yes and press the kbutton to format the memory card.
	Memory card is full.
	• Choose smaller image size.		57
Out of memory.	•	Delete images.	32
	• Insert new memory card.		18
	• Remove memory card and use internal memory.		19

E71