Fujitsu P42VHA20A, P42HHA10A Adjustment, Features setup screen has the following 5 options

• FEATURES setup screen has the following 5 options.

Adjustment	: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function	: Allows setting of 24-frame mode. (See P. E-34.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)
Input Terminal	: Can make an input terminal setting such as Video Input. (See P. E-35.)
Others	: Can make other settings. (See P. E-36–E-38.)

ADJUSTMENT

Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.

Select the item with	, and then adjust with	. Finally, press	to implement the adjustments.
Adjustment Item	Contents of Adjustments				Operation	Adjustment Range/Remarks
Dot Clock	You may find that pictures blur, depending on the			Use	to select the optimal value	–60 to +60
(RGB2)	clock frequency of your PC’s processor.			at which blurring of pictures is
	If you experience blurring, you can obtain a clearer			eliminated.
	picture by adjusting the “Dot Clock”.
Clock Phase	Pictures may blur as the clock phase of your PC			Use	to select the optimal value	Auto/Manual
(RGB2)	may be different. In this case, adjust the clock			at which blurring of pictures is		Manual: 1 to 32
	phase manually. Normally, the automatic setting			eliminated.
	ensures the optimal value.
Clamp Position	Adjusts the clamp position in accordance with the			Use	to select the optimal value.	–8 to +8
(RGB2, Comp.	input signal received from connected equipment.
video)	Normally, the automatic setting ensures the optimal
	value.
Auto Calibration	Adjusts the dynamic range of images to the			Display the Auto Calibration screen		Execute/Cancel
(RGB2)	optimum. Performed while a white screen signal is			and select Execute, and then use
	received.				to select the item.

* On-screen information disappears if you do not take any action for about 60 seconds.

English

E-33