Fujitsu P42HHA10W, P42HHA10A, P42VHA10W, P42VHA20A, P42VHA20W, P42VHA10A, P42VHA20U Factory Settings

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjus							tment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adju								st the
parameters. When you finish, the settings will be automatically stored.			Thus, when the display receives that signal, pictures				will be
displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines)		Horizontal frequency (kHz)		Vertical frequency (Hz)		Signal		DVI-D
640 x 480		31.47		59.94	VGA
640 x 480		37.50		75.00	VGA 75 Hz
640 x 480		43.27	85.01		VGA 85 Hz
720 x 400		31.47	70.09		400 lines
800 x 600		37.88	60.32		SVGA 60 Hz
800 x 600		46.88	75.00		SVGA 75 Hz
800 x 600		53.67	85.06		SVGA 85 Hz
1024 x 768		48.36	60.00		XGA 60 Hz
1024 x 768		60.02	75.03		XGA 75 Hz
1024 x 768		68.68	84.99		XGA 85 Hz
1280 x 1024	63.98		60.02		SXGA 60 Hz
1280 x 1024	79.98		75.03		SXGA 75 Hz
1600 x 1200	75.00		60.00		UXGA 60 Hz
1600 x 1200	106.25		85.00		UXGA 85 Hz
848 x 480	31.02		60.00
852 x 480	31.72		59.97
1360 x 768		47.71	60.01
720 x 485		15.73	59.94		60 fields
720 x 575		15.63	50.00		50 fields
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissi						ble ranges.	Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.

*In the DVI-D mode, the input signal can be restricted partly.

In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:

English

Main corresponding signals (Comp.video mode)

Horizontal	Vertical		Signal
frequency (kHz)	frequency (Hz)
15.73	59.94		SDTV 480I
15.63	50.00	SDTV 576I
31.47	59.94		SDTV 480P
31.25	50.00	SDTV 576P
45.00	60.00	HDTV 720P
37.50	50.00	HDTV 720P
33.75	60.00		HDTV 1080I
28.13	50.00	HDTV 1080I

Main corresponding signals (Video, S-video mode)

Horizontal	Vertical		Signal
frequency (kHz)	frequency (Hz)
15.73	59.94		NTSC
15.63	50.00	PAL
15.63	50.00	SECAM
15.63	59.52	PAL60
15.63	50.00	N-PAL
15.73	59.95		M-PAL
15.73	59.94		4.43NTSC

•	Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
•	“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible ra	nge.

•You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-38.)

•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

E-41